Images à titre indicatif uniquement
MX25V8035FM1Q
+NomenclatureIC FLASH 8MBIT SPI 104MHZ 8SOP
-
FabricantWanghong
-
Pièce fabricant #MX25V8035FM1Q
-
Package SOIC-8
-
En stock6578
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| Series | MXSMIO™ |
| ProductStatus | Active |
| MemoryType | Non-Volatile |
| MemoryFormat | FLASH |
| Technology | FLASH - NOR |
| MemorySize | 8Mb (2M x 4, 4M x 2, 8M x 1) |
| MemoryInterface | SPI |
| ClockFrequency | 104 MHz |
| WriteCycleTime-WordPage | 100µs, 4ms |
| Voltage-Supply | 2.3V ~ 3.6V |
| OperatingTemperature | -40°C ~ 125°C |
| MountingType | Surface Mount |
| Package/Case | 8-SOIC (0.154, 3.90mm Width) |
Présentation
Description
The MX25V8035FM1Q features advanced security mechanisms, such as block protection and hardware/software write protection, to prevent unauthorized data access and modifications. It also includes a JEDEC-standard manufacturer and device ID, enabling easy identification in various systems. The device supports a wide temperature range, making it versatile for use in different environmental conditions.
Overall, the MX25V8035FM1Q is a reliable choice for systems requiring non-volatile memory with moderate storage capacity, low power consumption, and enhanced security features. Its compact size and performance make it ideal for applications in consumer electronics, industrial controls, and automotive systems.
Equivalent
1. Winbond W25Q80DV
2. Micron M25P80
3. ISSI IS25LP080D
4. Adesto AT25SF081
5. Cypress S25FL208K
These alternatives offer similar capacities and interfaces, but always verify specific features and compatibility requirements against the MX25V8035FM1Q for replacements in your application.
Features
Key features include a 4KB uniform sector architecture, which allows for flexible data management with minimal write/erase times. The device supports fast read speeds of up to 104 MHz, enhancing performance for quick data access. It also features a program/erase cycle endurance of at least 100,000 cycles, ensuring long-term reliability.
Additional features include secure silicon serial number functionality, block protection for data security, and a deep power-down mode to further reduce power usage. With industrial temperature range support, the MX25V8035FM1Q is suitable for a variety of applications, including consumer electronics, industrial control systems, and automotive electronics.
Pinout
Pin Count:
The MX25V8035FM1Q comes in an 8-pin package, commonly a SOP-8 or similar configuration.
Pin Functions:
1. CS# (Chip Select): Activates the device when low, enabling communication.
2. SO (Serial Output): Outputs data during read operations.
3. WP# (Write Protect): Temporarily disables write operations to protect data.
4. VSS (Ground): Ground reference for the device.
5. SI (Serial Input): Receives data input during write operations.
6. SCLK (Serial Clock): Synchronizes data transfer.
7. HOLD#: Pauses serial communication without resetting the chip.
8. VCC: Power supply for the device, typically 2.3V to 3.6V.
This configuration allows for efficient interfacing with microcontrollers and other digital devices, supporting applications that require reliable and compact memory solutions.
Manufacturer
Application
1. Consumer Electronics: Used in devices like TVs, set-top boxes, and gaming consoles for firmware storage.
2. Industrial Automation: Employed in systems requiring stable storage for configuration data and system firmware.
3. Networking Equipment: Utilized in routers, switches, and modems for storing boot code and settings.
4. Automotive: Suitable for infotainment systems, dashboards, and other electronic control units (ECUs).
5. IoT Devices: Ideal for small-scale IoT gadgets where compact and reliable memory is essential.
These applications benefit from the chip's low power consumption, fast data access, and high reliability.