JS28F128J3F75B

The JS28F128J3F75B is a flash memory chip manufactured by Intel, designed for use in a variety of electronic devices. It features a density of 128 Mb (megabits) and is based on NAND flash technology, which provides non-volatile storage capable of retaining data without power.
Key features include an x8 or x16 data bus interface, making it versatile for different applications. The chip supports advanced programming and erasing algorithms, which help optimize performance and efficiency. It operates at a voltage range of 2.7V to 3.6V, suitable for both portable and embedded systems.
The JS28F128J3F75B is typically utilized in applications such as firmware storage in embedded systems, consumer electronics, and mobile devices due to its compact size and reliability. Its architecture allows for quick read and write cycles, making it ideal for applications requiring fast data access. Overall, it is a vital component in modern electronics for efficient data storage solutions.

The JS28F128J3F75B chip is a 128Mb (16MB) NAND Flash memory. Equivalent products include:
1. Micron MT28EW128ABA
2. Intel 28F128J3
3. Winbond W29N01GV
4. Spansion S29GL128N
Always verify specific compatibility requirements, such as voltage and pin configuration, before substituting any component.

The JS28F128J3F75B is a 128Mb (16MB) NAND Flash memory device designed for various applications, including mobile devices, consumer electronics, and embedded systems. Key features include:
1. Interface: It utilizes a parallel interface, providing compatibility with various controllers.
2. Density: Offers a storage capacity of 128Mb, suitable for data storage applications.
3. Data Transfer Rate: Supports high-speed data transfer rates, enhancing performance for applications requiring fast read/write operations.
4. Endurance: Typically rated for 10,000 program/erase cycles, making it durable for frequent data updates.
5. Data Retention: Provides a data retention period of around 10 years, ensuring long-term storage reliability.
6. Power Consumption: Designed for low power operation, making it efficient for battery-operated devices.
7. Security Features: Incorporates features like bad block management and wear leveling to enhance reliability.
8. Temperature Range: Operates within a broad temperature range, suitable for various environmental conditions.
These features make the JS28F128J3F75B suitable for a wide range of applications requiring reliable and efficient flash memory solutions.

The JS28F128J3F75B is a 128Mb (16MB) NOR Flash memory device produced by Intel. It features a total of 48 pins in a TSOP (Thin Small Outline Package) configuration.
The primary functions of these pins include:
- Data Lines (DQ0-DQ7): 8-bit data input/output for reading from and writing to the memory.
- Command/Address Lines: Used for inputting commands and addressing memory locations.
- Chip Enable (CE): Activates the memory device.
- Output Enable (OE): Enables data output.
- Write Enable (WE): Controls write operations.
- Reset (RESET): Resets the device to its initial state.
- Vcc and Vss: Power supply and ground connections.
- Ready/Busy (R/B): Indicates the status of the memory operation.
This device is commonly used in embedded systems for code storage and execution.

The JS28F128J3F75B is manufactured by Intel Corporation. Intel is a multinational technology company headquartered in Santa Clara, California. It is primarily known for designing and manufacturing semiconductor products, including microprocessors, memory modules, and flash memory. Intel is one of the largest and most prominent companies in the semiconductor industry, playing a significant role in the development of computer hardware and data processing technologies. Established in 1968, Intel pioneered the microprocessor, which serves as a fundamental component of modern computing devices, including PCs, servers, and embedded systems. The JS28F128J3F75B specifically is a type of NOR flash memory used in various electronic applications, providing reliable storage solutions for embedded systems and consumer electronics.

The JS28F128J3F75B is a NAND flash memory device primarily used in embedded systems. Its application areas include:
1. Consumer Electronics: Used in smartphones, tablets, and digital cameras for storage of multimedia files.
2. IoT Devices: Provides storage for firmware and data in Internet of Things applications.
3. Automotive Systems: Utilized in infotainment systems and advanced driver-assistance systems (ADAS).
4. Industrial Applications: Supports data logging and storage in industrial automation and control systems.
5. Networking Equipment: Employed in routers and switches for firmware and configuration storage.
Overall, it serves in areas requiring reliable and high-performance non-volatile memory solutions.

The JS28F128J3F75B is packaged in a 48-ball FBGA (Fine Ball Grid Array) format. This compact package facilitates efficient space utilization on PCBs and ensures reliable electrical performance for the NAND flash memory device.