ISL6612ACBZ-T

Images à titre indicatif uniquement

ISL6612ACBZ-T

+Nomenclature

IC GATE DRVR HALF-BRIDGE 8SOIC

  • FabricantRenesas Electronics, États - Unis

  • Pièce fabricant #ISL6612ACBZ-T

  • Package SOP8

  • En stock3542

365 Garantie qualité 24h/24

7*24 Garantie de service 24h/24

90-Garantie après-vente 24h/24

Garantie produit authentique

Spécifications

Attribut Valeur
Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
DrivenConfiguration Half-Bridge
ChannelType Synchronous
NumberofDrivers 2
GateType N-Channel MOSFET
Voltage-Supply 10.8V ~ 13.2V
Current-PeakOutput(SourceSink) 1.25A, 2A
InputType Non-Inverting
HighSideVoltage-Max(Bootstrap) 36 V
Rise/FallTime(Typ) 26ns, 18ns
OperatingTemperature 0°C ~ 125°C (TJ)
MountingType Surface Mount
Package/Case 8-SOIC (0.154, 3.90mm Width)

Présentation

Description

ISL6612ACBZ-T is a dual-channel, interleaved, multiphase buck regulator controller from Intersil (Renesas). It’s used to generate CPU/GPU core rails by driving two synchronized PWM outputs that switch external MOSFETs in a two-phase buck converter. Key features typically include: two outputs for interleaved phases, current-sense feedback, soft-start, enable, Power Good (PGOOD), and protection functions such as overcurrent/UVLO. It’s aimed at high-current DC‑DC applications like CPU/gPU VRMs, FPGA boards, and other low-voltage, high-current regulators. The “CBZ-T” suffix denotes the package type and tape-and-reel ordering. For exact electrical specs (input voltage range, switching frequency, pinout, and sense pins), refer to the official datasheet.

Features

ISL6612ACBZ-T features (concise):
- Dual PWM controllers for multiphase VRM applications (e.g., CPU core regulation)
- 2-phase interleaved operation with current-mode control
- Slope-compensated current limiting and phase sharing
- Programmable switching frequency (typical range suitable for VRMs)
- Error amplifier, feedback reference and adjustable output voltage with tracking
- Soft-start and programmable ramp; voltage droop/load-line control
- UVLO, enable/power-down and power-good signaling
- Overcurrent/short-circuit protection, overvoltage protection, and thermal shutdown
- Gate-drive outputs for external high-/low-side MOSFETs (external FETs required)
- Flexible control: synchronized or independent channels; suitable for multi-phase designs
Note: Exact frequency range and pin/package specifics are in the datasheet; this summarizes the common features for the ISL6612 family.

Pinout

- Pin count: 20 pins (20-pin package).
- Function: Dual-phase PWM controller for multiphase buck regulators (VRMs). It generates two PWM outputs to drive external MOSFETs for CPU core voltage regulation, including oscillator, error amplifiers, soft-start, current limit, enables, and power-good/remote-sense features.

Manufacturer

The ISL6612ACBZ-T is manufactured by Intersil. Intersil is a semiconductor company specializing in analog and mixed-signal ICs, particularly power-management and high-performance analog products. In 2017, Intersil was acquired by Renesas Electronics, so the product line is now under Renesas.

Application

ISL6612ACBZ-T is a dual, multi-phase PWM controller used to drive high-current synchronous buck regulators. Typical applications include:
- CPU/GPU core voltage VRMs in desktops, servers, and workstations
- Motherboard VRMs and graphic-card power regulators
- High-current VRMs for FPGAs, ASICs, and other demanding loads
- Telecom and network equipment DC-DC power modules
- Industrial and embedded power supplies requiring efficient multi-phase buck regulation
- Power modules and VRM subassemblies in data-center infrastructure
Note: It’s intended for high-efficiency, multi-phase buck regulation in various high-performance power-supply apps.

Package

ISL6612ACBZ-T comes in an 8‑pin Small‑Outline IC package (SOIC), package code CBZ, with the −T option specifying Tape‑and‑Reel packaging.