Images à titre indicatif uniquement
HMC253ALC4
+NomenclatureIC RF SWITCH SP8T 3.5GHZ 24CQFN
-
FabricantAnalog Equipment GmbH.
-
Pièce fabricant #HMC253ALC4
-
En stock113
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| PartStatus | Active |
| BaseProductNumber | HMC253 |
| RFType | WiMax |
| Topology | Absorptive |
| Circuit | SP8T |
| FrequencyRange | 0Hz ~ 3.5GHz |
| Isolation | 43dB |
| InsertionLoss | 1.1dB |
| TestFrequency | 2GHz |
| P1dB | 24dBm |
| IIP3 | 43dBm |
| Impedance | 50Ohm |
| Voltage-Supply | 5V |
| OperatingTemperature | -40°C ~ 85°C |
| MountingType | Surface Mount |
| Package | 24-TFCQFN Exposed Pad |
| SupplierDevicePackage | 24-CQFN (4x4) |
| Packaging | Strip |
Présentation
Description
HMC253ALC4 is a microwave MMIC device from Hittite Microwave (now Analog Devices). It’s a 50-ohm matched RF IC in the ALC4 ceramic package. The HMC253 family covers various front-end RF blocks (amplifiers, mixers, or switches); the exact function of the HMC253ALC4 depends on the die inside—so check the datasheet to confirm whether this variant is an LNA, mixer, or switch. Typical use is as a RF front-end block in wireless, aerospace/defense, or test equipment, often requiring external matching networks and a bias supply. Key specs to verify in the datasheet include the frequency range, gain or conversion loss, noise figure, IIP3/OP3, bias pins, and package/pinout. The datasheet also provides recommended operating conditions and an evaluation board. If you’re after a precise description, the exact datasheet and application note for HMC253ALC4 are the best sources.
Pinout
Pin count: 4 pins.
Function: HMC253ALC4 is a GaAs MMIC RF amplifier in a 4-pin package. It provides single-ended RF amplification with a DC bias pin. Typical pinout (approximate): RF input, RF output, Vcc (DC bias), and Ground.
Function: HMC253ALC4 is a GaAs MMIC RF amplifier in a 4-pin package. It provides single-ended RF amplification with a DC bias pin. Typical pinout (approximate): RF input, RF output, Vcc (DC bias), and Ground.
Manufacturer
- Manufacturer: Analog Devices, Inc. (ADI). The HMC253ALC4 is in the line that originated with Hittite Microwave, which ADI acquired in 2014.
- Company type: A global semiconductor company that designs and manufactures analog, mixed-signal, and digital signal processing ICs, including RF/microwave components.
- Company type: A global semiconductor company that designs and manufactures analog, mixed-signal, and digital signal processing ICs, including RF/microwave components.
Application
HMC253ALC4 is a GaAs MMIC mixer used in RF/microwave front-ends. Common application areas include:
- Wireless transceivers and receivers (downconverter/upconverter)
- Satellite/VSAT front-ends and microwave point-to-point links
- Radar and automotive radar sensor subsystems
- Military/Aerospace RF/microwave system front-ends
- Test & measurement equipment (mixing stages in VNAs, spectrum analyzers, signal generators)
- Prototyping and production where compact, high-performance RF mixers are needed
In short: any RF/microwave path requiring mixing (RF↔IF) in both transmit and receive chains.
- Wireless transceivers and receivers (downconverter/upconverter)
- Satellite/VSAT front-ends and microwave point-to-point links
- Radar and automotive radar sensor subsystems
- Military/Aerospace RF/microwave system front-ends
- Test & measurement equipment (mixing stages in VNAs, spectrum analyzers, signal generators)
- Prototyping and production where compact, high-performance RF mixers are needed
In short: any RF/microwave path requiring mixing (RF↔IF) in both transmit and receive chains.
Package
Leadless Ceramic Chip Carrier (LCC) package for surface-mount.
