Images à titre indicatif uniquement
GD25Q64EWIGR
+NomenclatureIC FLASH 64MBIT SPI/QUAD 8WSON
-
FabricantGigadevice Semiconductor (Hong Kong) Co., Ltd
-
Pièce fabricant #GD25Q64EWIGR
-
En stock7041
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| Part Status | Active |
| Digi Key Programmable | Not Verified |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR |
| Memory Size | 64Mbit |
| Memory Organization | 8M x 8 |
| Memory Interface | SPI - Quad I/O |
| Clock Frequency | 133 MHz |
| Write Cycle Time - Word, Page | 70µs, 2.4ms |
| Access Time | 7 ns |
| Voltage - Supply | 2.7V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Supplier Device Package | 8-WSON (5x6) |
| Base Product Number | GD25Q64 |
Présentation
Description
Key features include:
1. Density: 64Mb (8MB) storage capacity.
2. Interface: SPI-compatible, supporting standard, dual, and quad I/O modes for high-speed data transfer.
3. Speed: Offers fast read speeds up to 104 MHz in Quad mode.
4. Endurance: Typically supports 100,000 program/erase cycles and data retention of up to 20 years.
5. Package: Available in various packages, including SOP-16 and WLCSP.
The GD25Q64EWIGR is ideal for storing firmware, configuration data, and other applications where reliable non-volatile storage is required. Its compact size and efficient performance make it a popular choice among developers.
Equivalent
1. W25Q64JV - Winbond
2. MX25L6433F - Macronix
3. S25FL064P - Cypress (Infineon)
4. N25Q064A - Micron
These alternatives vary in specifications, so it's essential to check compatibility regarding pin configuration, voltage, and performance parameters.
Features
1. Memory Density: 64Mb (8MB) with 4K byte sectors and 64K byte blocks.
2. Data Read Speed: Fast read speeds up to 104MHz in QSPI mode.
3. Low Power Consumption: Designed for low power operation, making it suitable for battery-powered applications.
4. Erase and Programming: Supports sector, block, and chip erase with flexible programming options.
5. Data Protection: Features hardware and software protection mechanisms to prevent accidental writes.
6. Operating Voltage: Typically operates at 2.7V to 3.6V, making it compatible with various devices.
7. Temperature Range: Industrial temperature range available, suitable for harsh environments.
This memory chip is ideal for applications in consumer electronics, automotive, and industrial sectors where reliable, high-speed storage is necessary.
Pinout
Pin Count: 8 pins.
Pin Functions:
1. CS# (Chip Select): Active low signal to enable the device.
2. SO (Serial Output): Data output pin for serial communication.
3. SI (Serial Input): Data input pin for serial communication.
4. SCK (Serial Clock): Clock input pin for synchronizing data transfer.
5. WP# (Write Protect): Active low signal to protect memory from write operations.
6. RST# (Reset): Active low reset pin, used to reset the device.
7. VCC: Power supply pin, typically 2.7V to 3.6V.
8. GND: Ground pin.
This chip supports various features such as quad I/O and has a high-speed interface for efficient data access.
Manufacturer
Application
1. Consumer Electronics: For firmware storage in devices like TVs, cameras, and gaming consoles.
2. Industrial Applications: In control systems and automation equipment for data logging and firmware updates.
3. Automotive: For storing automotive firmware and configurations in infotainment systems.
4. IoT Devices: In smart home devices for storing configurations and operational data.
5. Networking Equipment: For boot code and configuration storage in routers and switches.
Its fast read and write capabilities make it suitable for applications requiring quick data access.