Images à titre indicatif uniquement
IC FLASH 64MBIT SPI/QUAD 8SOP
-
FabricantGigadevice Semiconductor (Hong Kong) Co., Ltd
-
Pièce fabricant #GD25B64CSIGR
-
En stock17047
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| Series | GD25B |
| Part Status | Active |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR (SLC) |
| Memory Size | 64Mbit |
| Memory Organization | 8M x 8 |
| Memory Interface | SPI - Quad I/O |
| Clock Frequency | 120 MHz |
| Write Cycle Time - Word, Page | 50µs, 2.4ms |
| Voltage - Supply | 2.7V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209", 5.30mm Width) |
| Supplier Device Package | 8-SOP |
| Packaging | Tape & Reel (TR) |
| Access Time | 7 ns |
Présentation
Description
GD25B64CSIGR is a 64-Mbit serial (SPI) flash memory from GigaDevice (GD25B64C family). It provides 8 MBytes of non-volatile storage accessible over a standard SPI bus (MOSI/MISO, SCLK, CS). Key features: typical page size 256 bytes; supports read (including fast read), page program, and erase operations (4 KB sectors, 32 KB/64 KB blocks, and full-chip erase); requires a Write Enable (WREN) before programming/erasing and exposes a status register with a WIP bit. Supply voltage is in the common SPI flash range (around 2.7–3.6 V), with high-speed SPI operation possible (clock rates in the tens of MHz, depending on device variant and setup). Package: 8-pin SOP (SIL/ SOIC) with RoHS-compliant packaging (suffix “SIGR”). Applications include firmware storage, bootloaders, and data logging in embedded systems. For exact electrical specs, timing, and the complete command set, consult the GD25B64C datasheet; the “SIGR” suffix denotes the SOP-8 RoHS package variant of the device.
Equivalent
Equivalents (64-Mbit SPI NOR Flash) from major vendors:
- Winbond W25Q64FV/JV
- Macronix MX25L6406E
- Spansion/Cypress S25FL064K
- ISSI IS25LP064A
- Microchip M25P64
Note: Ensure same voltage (e.g., 3.3V) and package (SO8) and verify opcodes/timing in datasheets for GD25B64C compatibility.
- Winbond W25Q64FV/JV
- Macronix MX25L6406E
- Spansion/Cypress S25FL064K
- ISSI IS25LP064A
- Microchip M25P64
Note: Ensure same voltage (e.g., 3.3V) and package (SO8) and verify opcodes/timing in datasheets for GD25B64C compatibility.
Features
Key features of GD25B64CSIGR:
- 64 Mb (8 MB) serial Flash memory.
- SPI-compatible interface; 3.3V operation (2.7–3.6V range); 8-pin SOP (SI) package; RoHS (GR).
- Fast read support; standard Read available; up to high-speed clock (datasheet specifies fast-read speeds up to 104 MHz).
- 256-byte page program; erase organization: 4 KB sectors; 32 KB / 64 KB blocks; chip erase.
- Write/erase endurance: typically ~100k cycles per sector; data retention ~20 years.
- Power modes: deep power-down; standby/reset capabilities; wake-on-read support.
- Write protection: status-register and WP pin protection; sector/block protection features.
- Temperature range: industrial (-40 to 85°C) typical.
Ideal for code shadowing, boot ROM, and compact storage in embedded systems.
- 64 Mb (8 MB) serial Flash memory.
- SPI-compatible interface; 3.3V operation (2.7–3.6V range); 8-pin SOP (SI) package; RoHS (GR).
- Fast read support; standard Read available; up to high-speed clock (datasheet specifies fast-read speeds up to 104 MHz).
- 256-byte page program; erase organization: 4 KB sectors; 32 KB / 64 KB blocks; chip erase.
- Write/erase endurance: typically ~100k cycles per sector; data retention ~20 years.
- Power modes: deep power-down; standby/reset capabilities; wake-on-read support.
- Write protection: status-register and WP pin protection; sector/block protection features.
- Temperature range: industrial (-40 to 85°C) typical.
Ideal for code shadowing, boot ROM, and compact storage in embedded systems.
Pinout
- Pin count: 8 pins (SOP-8 package, GD25B64CSIGR).
- Function: 64-Mbit serial (SPI) flash memory for non-volatile storage of firmware/data. Uses standard SPI pins (CS, CLK, DI, DO) plus WP#, HOLD#, VCC, GND; supports typical read/page program/sector erase operations.
- Function: 64-Mbit serial (SPI) flash memory for non-volatile storage of firmware/data. Uses standard SPI pins (CS, CLK, DI, DO) plus WP#, HOLD#, VCC, GND; supports typical read/page program/sector erase operations.
Manufacturer
- Manufacturer: GigaDevice Semiconductor Inc. (GD).
- Company type: A Chinese fabless semiconductor company that designs and markets flash memory (SPI NOR flash) and microcontroller products, outsourcing manufacturing to foundries.
- Company type: A Chinese fabless semiconductor company that designs and markets flash memory (SPI NOR flash) and microcontroller products, outsourcing manufacturing to foundries.
Application
GD25B64CSIGR is a 64-Mbit SPI serial flash memory used for persistent storage in embedded systems. Common application areas:
- Firmware storage and OTA update images for MCUs/SoCs
- Boot memory and code shadowing for fast startup
- Non-volatile data logging (sensor data, events)
- Configuration and calibration data storage
- Application code storage in industrial controllers, consumer electronics, networking gear, IoT devices, and automotive interiors
- Firmware storage and OTA update images for MCUs/SoCs
- Boot memory and code shadowing for fast startup
- Non-volatile data logging (sensor data, events)
- Configuration and calibration data storage
- Application code storage in industrial controllers, consumer electronics, networking gear, IoT devices, and automotive interiors
Package
An 8-pin SOP (SOIC) package; RoHS-compliant (lead-free) for the GD25B64C series.
