W25Q128JVFIM

Images à titre indicatif uniquement

W25Q128JVFIM

+Nomenclature

IC FLASH 128MBIT SPI/QUAD 16SOIC

365 Garantie qualité 24h/24

7*24 Garantie de service 24h/24

90-Garantie après-vente 24h/24

Garantie produit authentique

Spécifications

Attribut Valeur
Series SpiFlash®
PartStatus Active
BaseProductNumber W25Q128
DigiKeyProgrammable Not Verified
MemoryType Non-Volatile
MemoryFormat FLASH
Technology FLASH - NOR
MemorySize 128Mbit
MemoryOrganization 16M x 8
MemoryInterface SPI - Quad I/O, QPI, DTR
ClockFrequency 133 MHz
WriteCycleTime-Word,Page 3ms
Voltage-Supply 2.7V ~ 3.6V
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package 16-SOIC (0.295", 7.50mm Width)
SupplierDevicePackage 16-SOIC
Packaging Tube

Présentation

Description

W25Q128JVFIM is Winbond’s 128‑Mbit serial flash memory (firmware and data storage) in an 8‑pin package. It supports SPI with dual/quad I/O and QPI modes for high throughput.
Key specs
- Capacity: 128 Mbit (16 MB)
- Interface: SPI with dual/quad I/O and QPI; typical read up to 104 MHz (SPI)
- Voltage: 2.7–3.6 V
- Organization: 16,777,216 bytes; 4 KB sectors; 64 KB blocks; full‑chip erase
- Performance: 256‑byte page programming; fast/continuous read; supports Quad/SPI read
- Features: Deep power‑down, hardware write protection, status/security features, CRP
- Endurance/retention: ~100,000 P/E cycles; ~20+ year data retention
- Applications: boot/firmware flash, code storage, data logging in microcontroller systems
Common commands (illustrative): READ, FAST READ, PAGE PROGRAM, SECTOR/ BLOCK/ CHIP ERASE, RDSR/WRSR, WREN/WRDI, RDID.
Note: exact timing and mode support vary by revision; check the latest datasheet for W25Q128JVFIM.

Equivalent

Equivalent products (3.3V, 128-Mbit SPI flash) from other vendors: Macronix MX25L12845G, GigaDevice GD25Q128CSIG or GD25Q128C, ISSI IS25LP128F (or IS25LP128D), Spansion/Cypress S25FL128S. Check JEDEC ID, voltage, and timing for pin compatibility.

Features

Key features of Winbond W25Q128JVFIM:
- 128-Mbit (16 MB) serial flash memory
- SPI interface with Standard, Dual SPI, and Quad I/O (DQ0–DQ3) modes
- 2.7–3.6 V operation (3.3 V nominal)
- Up to 104 MHz read (fast read, Quad/Dual I/O modes supported)
- 3-byte addressing (sufficient for 16 MB)
- Memory organization: 4 KB sectors; 32 KB and 64 KB blocks; chip erase
- Page program: 256-byte pages
- Deep power-down mode; hardware reset; WP#/HOLD# pins; status/ protection bits
- JEDEC ID and Unique ID support; Quad Enable bit
- Industrial temperature range: roughly -40°C to +85°C
- Package: 8-pin SOP (and related small-footprint options)
Note: exact timing and endurance specs vary by lot and datasheet revision.

Pinout

- Pin count: 8 pins (8-pin SOP/SOIC package)
- Function: 128-Mbit serial SPI NOR flash memory (Winbond W25Q128JV family) for non-volatile storage. Interfaces via SPI (CS, CLK, DI, DO) with WP and HOLD pins for protection and control; supports standard flash operations (read, write/programmable page, sector erase, etc.).

Manufacturer

- Manufacturer: Winbond Electronics Corporation.
- What kind of company: A Taiwanese semiconductor company that designs and manufactures memory products (notably NOR flash and DRAM); an integrated device manufacturer (IDM) with its own fabrication and global sales.

Application

W25Q128JVFIM is a 128-Mbit (16 MB) serial SPI flash. Common application areas:
- Firmware storage for microcontrollers and boot code in embedded systems
- External program memory for consumer electronics (printers, cameras, set-top boxes)
- Data logging, configuration and calibration storage in IoT, wearables, industrial/automation devices
- Firmware update/storage with bootloader support (update and recovery)
- Code/asset storage in networking gear (routers, modems) and automotive/industrial electronics (industrial temperature variant)

Package

8-pin SOP (SOIC-8) package, Pb-free (lead-free).

Frequently Asked Questions


Q: What is the memory density and organization of the W25Q128JVFIM?
A: It offers 128Mbit density, organized as 16M x 8, suitable for code and data storage in embedded systems.


Q: Can this device support high-speed Quad I/O operations?
A: Yes, it supports SPI, Quad I/O, QPI, and DTR modes with a maximum clock frequency of 133 MHz for fast data transfer.


Q: What is the operating voltage range for this flash memory?
A: It operates from 2.7V to 3.6V, making it compatible with standard 3.3V logic systems.


Q: What is the typical page write cycle time?
A: The typical write cycle time for a word or page is 3ms, supporting efficient programming.


Q: Is this component suitable for industrial temperature applications?
A: Yes, it has an operating temperature range of -40°C to 85°C, ideal for industrial environments.


Q: What package type is the W25Q128JVFIM available in?
A: It comes in a 16-SOIC package with a 7.50mm width, supplied in tube packaging.


Produits liés à W25Q128JVFIM

Comparaison connexe

  • Devis rapide

  • Envoyez votre demande de devis pour W25Q128JVFIM Utilisez ce formulaire. Nous vous répondrons sous 12 heures.