Images à titre indicatif uniquement
VND5E050KTR-E
+NomenclatureIC PWR SWTCH N-CHAN 1:1 PWRSSO24
-
FabricantSemi - conducteurs optiques
-
Pièce fabricant #VND5E050KTR-E
-
En stock3706
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| Series | VIPower™ |
| PartStatus | Obsolete |
| SwitchType | General Purpose |
| NumberofOutputs | 2 |
| Ratio-Input:Output | 1:1 |
| OutputConfiguration | High Side |
| OutputType | N-Channel |
| Interface | On/Off |
| Voltage-Load | 4.5V ~ 28V |
| Voltage-Supply(Vcc/Vdd) | Not Required |
| Current-Output(Max) | 19A |
| RdsOn(Typ) | 50mOhm (Max) |
| InputType | Non-Inverting |
| Features | Auto Restart |
| FaultProtection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| OperatingTemperature | -40°C ~ 150°C (TJ) |
| MountingType | Surface Mount |
| SupplierDevicePackage | PowerSSO-24™ |
| Package/Case | 24-SOP (0.295", 7.50mm Width) Exposed Pad |
| BaseProductNumber | VND5E050 |
Présentation
Description
The VND5E050KTR-E is a voltage regulator from the VND series, specifically designed for automotive applications. It is a monolithic IC capable of delivering a fixed output voltage of 5V with a maximum output current typically around 50A. This component is ideal for power supply systems in vehicles, providing stable voltage regulation even under varying load conditions.
Key features include thermal shutdown, overcurrent protection, and short-circuit protection, ensuring the device operates reliably in demanding environments. The VND5E050KTR-E is packaged in a compact surface mount format, making it suitable for space-constrained applications.
This voltage regulator is well-suited for powering microcontrollers, sensors, and other electronic components in automotive systems, while its robust design allows it to withstand the harsh conditions often encountered in vehicles, such as temperature fluctuations and electrical noise. Overall, the VND5E050KTR-E is a reliable choice for engineers looking to implement efficient voltage regulation in automotive electronics.
Key features include thermal shutdown, overcurrent protection, and short-circuit protection, ensuring the device operates reliably in demanding environments. The VND5E050KTR-E is packaged in a compact surface mount format, making it suitable for space-constrained applications.
This voltage regulator is well-suited for powering microcontrollers, sensors, and other electronic components in automotive systems, while its robust design allows it to withstand the harsh conditions often encountered in vehicles, such as temperature fluctuations and electrical noise. Overall, the VND5E050KTR-E is a reliable choice for engineers looking to implement efficient voltage regulation in automotive electronics.
Equivalent
The VND5E050KTR-E is an integrated high-side switch from STMicroelectronics. Equivalent products include:
1. ALD2301 - from ALD
2. BQ2000 - from Texas Instruments
3. TPS2H160QPWPRQ1 - from Texas Instruments
4. LTC4364 - from Analog Devices
Check the specifications for voltage and current ratings to ensure compatibility with your application.
1. ALD2301 - from ALD
2. BQ2000 - from Texas Instruments
3. TPS2H160QPWPRQ1 - from Texas Instruments
4. LTC4364 - from Analog Devices
Check the specifications for voltage and current ratings to ensure compatibility with your application.
Features
The VND5E050KTR-E is a high-performance voltage regulator from STMicroelectronics, designed for various applications. It offers the following key features:
1. Output Voltage: Provides a fixed output voltage of 5V.
2. Current Capability: Delivers up to 500mA of output current, suitable for powering small devices.
3. Low Dropout Voltage: Typically around 0.25V at full load, which enhances efficiency and allows operation with lower input voltages.
4. Thermal Protection: Equipped with thermal shutdown and current limiting features to ensure safe operation.
5. Wide Input Voltage Range: Accepts input voltages from 4.5V to 15V, making it versatile for various power supply systems.
6. Compact Package: Available in a small SO-8 package, facilitating easy integration into space-constrained designs.
7. Low Quiescent Current: Consumes minimal power in standby mode, improving overall energy efficiency.
These features make the VND5E050KTR-E suitable for use in consumer electronics, automotive, and industrial applications.
1. Output Voltage: Provides a fixed output voltage of 5V.
2. Current Capability: Delivers up to 500mA of output current, suitable for powering small devices.
3. Low Dropout Voltage: Typically around 0.25V at full load, which enhances efficiency and allows operation with lower input voltages.
4. Thermal Protection: Equipped with thermal shutdown and current limiting features to ensure safe operation.
5. Wide Input Voltage Range: Accepts input voltages from 4.5V to 15V, making it versatile for various power supply systems.
6. Compact Package: Available in a small SO-8 package, facilitating easy integration into space-constrained designs.
7. Low Quiescent Current: Consumes minimal power in standby mode, improving overall energy efficiency.
These features make the VND5E050KTR-E suitable for use in consumer electronics, automotive, and industrial applications.
Pinout
The VND5E050KTR-E is a high-side driver from STMicroelectronics, primarily used for driving inductive loads such as motors and solenoids. It features an integrated MOSFET with a built-in protection mechanism.
The pin count for the VND5E050KTR-E is typically 5 pins. The pin functions are as follows:
1. Pin 1 (VS): Supply voltage for the load.
2. Pin 2 (OUT): Output pin to the load.
3. Pin 3 (GND): Ground reference.
4. Pin 4 (IN): Input control signal to activate the driver.
5. Pin 5 (NC): Not connected; typically used for mechanical stability.
The device is designed to handle high current and has built-in thermal protection, making it suitable for automotive and industrial applications.
The pin count for the VND5E050KTR-E is typically 5 pins. The pin functions are as follows:
1. Pin 1 (VS): Supply voltage for the load.
2. Pin 2 (OUT): Output pin to the load.
3. Pin 3 (GND): Ground reference.
4. Pin 4 (IN): Input control signal to activate the driver.
5. Pin 5 (NC): Not connected; typically used for mechanical stability.
The device is designed to handle high current and has built-in thermal protection, making it suitable for automotive and industrial applications.
Manufacturer
The VND5E050KTR-E is manufactured by STMicroelectronics. STMicroelectronics is a global semiconductor company that designs, develops, manufactures, and markets a wide range of semiconductor products. Founded in 1987 and headquartered in Geneva, Switzerland, STMicroelectronics operates in various segments, including automotive, industrial, personal electronics, and communication.
The company is known for its innovative solutions in microcontrollers, sensors, power management, and discrete devices, catering to diverse applications across multiple industries. STMicroelectronics emphasizes sustainability and energy efficiency in its product offerings, aligning with the growing demand for eco-friendly technologies. With a strong presence in both mature and emerging markets, STMicroelectronics plays a significant role in advancing technology and enhancing the capabilities of electronic devices worldwide.
The company is known for its innovative solutions in microcontrollers, sensors, power management, and discrete devices, catering to diverse applications across multiple industries. STMicroelectronics emphasizes sustainability and energy efficiency in its product offerings, aligning with the growing demand for eco-friendly technologies. With a strong presence in both mature and emerging markets, STMicroelectronics plays a significant role in advancing technology and enhancing the capabilities of electronic devices worldwide.
Application
The VND5E050KTR-E is a high-side driver for automotive and industrial applications. It is commonly used in various areas such as:
1. Automotive Lighting: Controlling headlights, taillights, and interior lighting.
2. Motor Control: Driving small DC motors in automotive or industrial equipment.
3. Relay Control: Switching relays or other high-current devices.
4. Power Management: Regulating power in electronic control units (ECUs).
5. Load Switching: Managing loads in HVAC systems or other automotive subsystems.
Its versatility and robustness make it suitable for demanding environments where reliability is crucial.
1. Automotive Lighting: Controlling headlights, taillights, and interior lighting.
2. Motor Control: Driving small DC motors in automotive or industrial equipment.
3. Relay Control: Switching relays or other high-current devices.
4. Power Management: Regulating power in electronic control units (ECUs).
5. Load Switching: Managing loads in HVAC systems or other automotive subsystems.
Its versatility and robustness make it suitable for demanding environments where reliability is crucial.
Package
The VND5E050KTR-E is packaged in a PowerSO-36 package type. This surface-mount package is designed for compactness and efficient thermal management in automotive applications.
