UCC38503DW

Images à titre indicatif uniquement

UCC38503DW

+Nomenclature

IC PFC CTR AVERAGE 100KHZ 20SOIC

365 Garantie qualité 24h/24

7*24 Garantie de service 24h/24

90-Garantie après-vente 24h/24

Garantie produit authentique

Spécifications

Attribut Valeur
Package Tube
ProductStatus Active
Mode Average Current
Frequency-Switching 100kHz
Current-Startup 150 µA
Voltage-Supply 9.7V ~ 18V
OperatingTemperature 0°C ~ 70°C
MountingType Surface Mount
Package/Case 20-SOIC (0.295, 7.50mm Width)

Présentation

Description

UCC38503DW is a Texas Instruments switching-regulator controller IC (part of the UCC38x/UCC3850 family) used in off‑line SMPS, especially isolated flyback/forward converters. It is a current‑mode PWM controller that drives an external power MOSFET and regulates output by sensing the primary current. The device includes startup logic, a regulated Vcc supply path, and built‑in protection features such as cycle‑by‑cycle current limit, undervoltage lockout, overcurrent/short‑circuit protection, overvoltage protection, and thermal shutdown. It supports fixed or programmable switching frequency (typical tens to hundreds of kHz) and is designed for compact power adapters, LED drivers, and telecom/ standby supplies. The “DW” suffix denotes a specific packaging/RoHS variant (check the datasheet for the exact package and pinout). For design guidance and detailed specs, refer to the TI UCC38503DW datasheet and TI application notes.

Equivalent

Direct drop-in equivalents don’t exist. UCC38503DW is TI’s primary-side/offline PWM controller in the UCC38x/UCC3850 family. Closest TI cross‑references: UCC38502DW and UCC38504DW (same family, similar features). For non‑TI options, there are similar off‑line controllers (e.g., On Semiconductor NCP1200/NCP1250 or ST L6599), but pinouts/features differ and redesign may be required. Use TI’s cross-reference tool for an exact substitute.

Features

Here are the typical features of TI UCC38503DW (flyback controller family):
- Integrated high-voltage switch (≈650–700V) for offline power supplies
- Quasi-resonant/valley-switching operation for high efficiency and reduced EMI
- Primary-side regulation (PSR) to eliminate optocouplers
- Peak current-mode control with slope compensation
- Programmable switching frequency with jitter/eco-mode options
- Cycle-by-cycle overcurrent protection and hiccup/short-circuit protection
- Overvoltage, undervoltage (UVLO) and thermal protection
- Soft-start and current-limit ramp to limit inrush and stress
- Standby/eco operation for very low standby power
- Suitable for compact, low-component-count flyback designs
- Available in DW package variant for surface-mount applications
Note: Verify exact specifications (voltage, current limits, package, and modes) in the specific UCC38503DW datasheet for your design.

Pinout

- Pin count: 8 pins (8-pin package, e.g., SOIC/DW)
- Function: PWM controller for flyback switching power supplies (off-line SMPS); drives the primary switch and provides current‑mode regulation for the flyback converter.

Manufacturer

Manufacturer: Texas Instruments Incorporated (TI).
What kind of company: TI is an American multinational semiconductor company that designs and manufactures analog, mixed-signal, and digital integrated circuits and related products; it is one of the world's largest semiconductor companies.

Application

UCC38503DW is a current-mode PWM controller intended for isolated flyback converters. Typical application areas include:
- Offline AC-DC power supplies and adapters (universal input, high efficiency)
- Power modules for consumer electronics (televisions, monitors, set-top boxes, printers)
- Telecomm and industrial equipment power rails requiring compact, efficient SMPS
- Standby/auxiliary supply designs and other low- to mid-power isolated power solutions
These uses leverage its flyback topology control to achieve good regulation, efficiency, and standby performance in compact form factors.

Package

UCC38503DW is an 8-pin surface-mount device in an SOIC (Small Outline Integrated Circuit) package.