TSOP75338TR

Images à titre indicatif uniquement

TSOP75338TR

+Nomenclature

SENSOR REMOTE REC 38.0KHZ 45M

  • FabricantDivision optoélectronique de Vishay Semiconductors

  • Pièce fabricant #TSOP75338TR

  • En stock7880

365 Garantie qualité 24h/24

7*24 Garantie de service 24h/24

90-Garantie après-vente 24h/24

Garantie produit authentique

Spécifications

Attribut Valeur
Supplier Vishay Semiconductor Opto Division
Package / Case Tape & Reel (TR),Cut Tape (CT)
Part Status Active
Sensing Distance 45m
BPF Center Frequency 38.0kHz
Voltage - Supply 2.5 V ~ 5.5 V
Supply Current 350 µA
Orientation Side View
Mounting Type Surface Mount

Présentation

Description

TSOP75338TR is a 38 kHz infrared receiver module. It contains a photodiode, low-noise preamp, automatic gain control, a 38 kHz band-pass filter, and a demodulator, delivering a clean digital output that represents received remote-control data. It operates from about 2.7–5.5 V and has three pins: GND, Vcc, and OUT. The output is active-low (low during a valid IR burst). It rejects ambient light and handles typical 38 kHz remote protocols (e.g., NEC, RC5, RC6). The “TR” suffix usually denotes Tape & Reel packaging for automated assembly. Common uses include TV/DVD/AV remotes, set-top boxes, and other consumer electronics. For best performance, place a decoupling capacitor near Vcc and connect the output to a microcontroller input with appropriate logic levels.

Equivalent

Common equivalents to TSOP75338TR (38 kHz IR demodulator):
- Vishay TSOP1738
- Vishay TSOP1838
- Vishay TSOP4838
- VS1838B (popular 38 kHz IR receiver module)
Note: pinouts and output logic can vary; verify datasheets and power requirements (usually 5V) before substituting.

Features

TSOP75338TR features:
- 38 kHz IR remote receiver with built-in preamplifier, automatic gain control, and 38 kHz band-pass demodulator
- Demodulated, active-low output (VO) compatible with microcontrollers
- Single-supply operation: 2.7 V to 5.5 V
- Low power consumption
- High immunity to ambient light and EMI
- 3-pin package (GND, Vcc, OUT); Tape & Reel packaging (TR)
- Suitable for standard IR protocols (e.g., NEC, RC-5) and 940 nm remote emitters

Pinout

- Pin count: 3 pins
- Functions: Vcc (power supply), GND (ground), and Output (demodulated IR data signal; active-low) from a 38 kHz IR remote-control receiver.

Manufacturer

- Manufacturer: Vishay Intertechnology, Inc.
- What kind of company: A global, publicly traded electronics components company that designs and manufactures semiconductors and passive components (diodes, resistors, capacitors, inductors, optoelectronics, etc.), including IR receiver modules like TSOP series.

Application

TSOP75338TR is a 38 kHz infrared remote-control demodulating receiver. Primary application areas:
- Consumer electronics: TVs, set-top boxes, DVD/Blu-ray players, audio/video receivers
- Home appliances: air conditioners, fans, home theater components
- Projectors and multimedia devices
- Embedded/DIY and home-automation projects using standard 38 kHz IR remotes
- Any system requiring 38 kHz IR remote demodulation (supports common IR protocols)

Package

TSOP75338TR uses an 8‑pin Thin Small Outline Package (SOP‑8), a surface‑mount package. The “TR” suffix indicates Tape & Reel packaging.

Produits liés à TSOP75338TR