Images à titre indicatif uniquement
TSOP6236TR
+NomenclatureSENSOR REMOTE REC 36.0KHZ 40M
-
FabricantDivision optoélectronique de Vishay Semiconductors
-
Pièce fabricant #TSOP6236TR
-
En stock9037
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| Supplier | Vishay Semiconductor Opto Division |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Part Status | Active |
| Sensing Distance | 40m |
| BPF Center Frequency | 36.0kHz |
| Voltage - Supply | 2.7 V ~ 5.5 V |
| Supply Current | 700 µA |
| Orientation | Side or Top View |
| Mounting Type | Surface Mount |
Présentation
Description
TSOP6236TR is Vishay’s 38 kHz infrared receiver/demodulator in the TSOP family. It integrates a preamplifier, automatic gain control, 38 kHz band-pass filter, and a demodulator that outputs a clean digital signal representing the encoded remote-control data. The TR suffix usually denotes tape-and-reel packaging for automated assembly.
Key points:
- Supply: 4.5–5.5 V; current a few mA
- Output: standard logic-level, idle high; active-low pulses when IR data is received
- Pinout (3 pins): Vcc, GND, OUT
- Designed for common IR protocols (NEC, RC5/RC6, SIRC, etc.)
- Typical indoor range: a few meters, depending on transmitter power and ambient light
- Pros: easy MCU interfacing, built-in demodulation and filtering, robust to ambient light
- Cons: fixed to 38 kHz remotes; not suitable for non-38 kHz protocols without extra hardware
Common use: hobbyist/embedded projects (Arduino, ESP32, etc.) for remote-control decoding.
Key points:
- Supply: 4.5–5.5 V; current a few mA
- Output: standard logic-level, idle high; active-low pulses when IR data is received
- Pinout (3 pins): Vcc, GND, OUT
- Designed for common IR protocols (NEC, RC5/RC6, SIRC, etc.)
- Typical indoor range: a few meters, depending on transmitter power and ambient light
- Pros: easy MCU interfacing, built-in demodulation and filtering, robust to ambient light
- Cons: fixed to 38 kHz remotes; not suitable for non-38 kHz protocols without extra hardware
Common use: hobbyist/embedded projects (Arduino, ESP32, etc.) for remote-control decoding.
Features
Key features of TSOP6236TR:
- 38 kHz IR remote control receiver with demodulated output.
- Internal preamplifier, automatic gain control (AGC), and 38 kHz band-pass filter for noise rejection.
- Output is a TTL/CMOS-compatible, active-low digital signal.
- Three-pin device with no external components required (plug-and-play).
- Wide supply range and low power consumption (typical mA range).
- Good ambient-light immunity and short-circuit protection.
- Small SMT package; Tape & Reel version: TSOP6236TR.
- Applications: TV/DVD/DVD players, set-top boxes, remote-controlled electronics.
- RoHS-compliant; operating temperature typically suitable for consumer electronics.
Note: Exact voltage/current specs and operating temperature may vary by exact revision; refer to the official datasheet for precise figures.
- 38 kHz IR remote control receiver with demodulated output.
- Internal preamplifier, automatic gain control (AGC), and 38 kHz band-pass filter for noise rejection.
- Output is a TTL/CMOS-compatible, active-low digital signal.
- Three-pin device with no external components required (plug-and-play).
- Wide supply range and low power consumption (typical mA range).
- Good ambient-light immunity and short-circuit protection.
- Small SMT package; Tape & Reel version: TSOP6236TR.
- Applications: TV/DVD/DVD players, set-top boxes, remote-controlled electronics.
- RoHS-compliant; operating temperature typically suitable for consumer electronics.
Note: Exact voltage/current specs and operating temperature may vary by exact revision; refer to the official datasheet for precise figures.
Pinout
- Pin count: 4 pins (SOP-4 package; TSOP6236TR is tape-and-reel version).
- Function: IR receiver/demodulator with built-in preamplifier and AGC for 36 kHz remote control signals; outputs a digital (active-low) data stream when a valid IR code is received. Typical pinout: 1 = GND, 2 = Vcc, 3 = OUT, 4 = NC (no connect).
- Function: IR receiver/demodulator with built-in preamplifier and AGC for 36 kHz remote control signals; outputs a digital (active-low) data stream when a valid IR code is received. Typical pinout: 1 = GND, 2 = Vcc, 3 = OUT, 4 = NC (no connect).
Manufacturer
- Manufacturer: Vishay Intertechnology, Inc.
- What kind of company: An American multinational electronics company that designs and manufactures discrete semiconductors and passive components (resistors, capacitors, inductors), as well as optoelectronics and sensors, used across many industries.
- What kind of company: An American multinational electronics company that designs and manufactures discrete semiconductors and passive components (resistors, capacitors, inductors), as well as optoelectronics and sensors, used across many industries.
Application
TSOP6236TR is a 38 kHz IR remote-control receiver/demodulator. Typical applications:
- IR remote control receivers for consumer electronics
- TVs, set-top boxes, DVD/Blu-ray players, audio equipment
- Home appliances (air conditioners, home theater systems)
- Home automation and IR control systems
- Embedded/DIY projects (Arduino, PIC, etc.)
- IR data communication and universal remote receiver modules
Note: Packaging TR denotes tape-and-reel; function remains the same.
- IR remote control receivers for consumer electronics
- TVs, set-top boxes, DVD/Blu-ray players, audio equipment
- Home appliances (air conditioners, home theater systems)
- Home automation and IR control systems
- Embedded/DIY projects (Arduino, PIC, etc.)
- IR data communication and universal remote receiver modules
Note: Packaging TR denotes tape-and-reel; function remains the same.
Package
TSOP6236TR uses an 8-pin SOP (SMD) package in Tape & Reel (TR) packaging.
