Images à titre indicatif uniquement
TLV6003DBVR
+Nomenclature-
FabricantTexas Instruments
-
Pièce fabricant #TLV6003DBVR
-
En stock5907
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Part Status | Active |
| Amplifier Type | General Purpose |
| Number of Circuits | 1 |
| Output Type | Rail-to-Rail |
| Slew Rate | 2.5V/µs |
| Gain Bandwidth Product | 5.5 kHz |
| Current - Input Bias | 100 pA |
| Voltage - Input Offset | 390 µV |
| Supply Current | 1mA |
| Current - Output / Channel | 200 µA |
| Voltage - Supply Span(Min) | 2.5 V |
| Voltage - Supply Span(Max) | 16 V |
| Operating Temperature | -55°C ~ 125°C (TA) |
| Mounting Type | Surface Mount |
Présentation
Description
The TLV6003DBVR is a low-power operational amplifier (op-amp) from Texas Instruments, designed for cost-sensitive and battery-powered applications. It operates on a single supply voltage ranging from 1.8V to 5.5V, making it suitable for a variety of portable and battery-operated electronics. The op-amp features a low quiescent current of 60µA per channel, which helps extend battery life in portable applications. It offers rail-to-rail input and output, ensuring full dynamic range utilization in low-voltage systems.
The TLV6003DBVR provides a wide bandwidth of 1MHz and a slew rate of 0.5V/µs, which is adequate for many general-purpose applications. It is available in a compact SOT-23 package, making it ideal for space-constrained designs. This op-amp is suitable for applications like signal conditioning, sensor interfacing, and active filtering. Its low power consumption and versatile features make it a popular choice for consumer electronics, medical devices, and industrial applications.
The TLV6003DBVR provides a wide bandwidth of 1MHz and a slew rate of 0.5V/µs, which is adequate for many general-purpose applications. It is available in a compact SOT-23 package, making it ideal for space-constrained designs. This op-amp is suitable for applications like signal conditioning, sensor interfacing, and active filtering. Its low power consumption and versatile features make it a popular choice for consumer electronics, medical devices, and industrial applications.
Equivalent
The TLV6003DBVR is a general-purpose operational amplifier. Equivalent products include the LM358 LMV321, and MCP6001, although specific electrical characteristics, package types, and performance may vary. It's crucial to compare parameters such as supply voltage, bandwidth, slew rate, and package to ensure compatibility with your application. Always consult datasheets for detailed specifications to ensure proper substitution.
Features
The TLV6003DBVR is a micropower operational amplifier designed by Texas Instruments. Key features include:
1. Low Power Consumption: With a typical quiescent current of only 13 µA per channel, it is ideal for battery-powered applications.
2. Wide Supply Voltage Range: Operates from 1.8V to 5.5V, making it versatile for various power supply configurations.
3. Rail-to-Rail Input and Output: Provides full input common-mode range and output swing close to both supply rails, enhancing dynamic range.
4. Low Offset Voltage: Features a low input offset voltage, typically around 0.7 mV, which is beneficial for precision applications.
5. Small Package: Available in a compact SOT-23 package, which saves space on PCB layouts.
6. Stability: Designed for unity-gain stability, allowing ease of use in a wide range of applications.
7. Temperature Range: Operates over an extended temperature range from -40°C to 125°C, suitable for industrial environments.
These features make the TLV6003DBVR suitable for use in sensor interfaces, portable devices, and other applications requiring efficient and reliable amplification.
1. Low Power Consumption: With a typical quiescent current of only 13 µA per channel, it is ideal for battery-powered applications.
2. Wide Supply Voltage Range: Operates from 1.8V to 5.5V, making it versatile for various power supply configurations.
3. Rail-to-Rail Input and Output: Provides full input common-mode range and output swing close to both supply rails, enhancing dynamic range.
4. Low Offset Voltage: Features a low input offset voltage, typically around 0.7 mV, which is beneficial for precision applications.
5. Small Package: Available in a compact SOT-23 package, which saves space on PCB layouts.
6. Stability: Designed for unity-gain stability, allowing ease of use in a wide range of applications.
7. Temperature Range: Operates over an extended temperature range from -40°C to 125°C, suitable for industrial environments.
These features make the TLV6003DBVR suitable for use in sensor interfaces, portable devices, and other applications requiring efficient and reliable amplification.
Pinout
The TLV6003DBVR is an operational amplifier (op-amp) designed by Texas Instruments. It is housed in a 5-pin SOT-23 package, which is identified by the "DBV" part of the designation. Here is a breakdown of its pin functions:
1. Pin 1 - OUT: This is the output pin where the amplified signal is available.
2. Pin 2 - V- (GND): The negative power supply pin or ground pin.
3. Pin 3 - +IN: The non-inverting input pin of the op-amp.
4. Pin 4 - -IN: The inverting input pin of the op-amp.
5. Pin 5 - V+: The positive power supply pin.
The TLV6003 is a low-power, low-voltage operational amplifier, suitable for cost-sensitive and portable applications. It operates with a supply voltage range from 1.8V to 5.5V and is designed for general-purpose applications where low power consumption is a priority.
1. Pin 1 - OUT: This is the output pin where the amplified signal is available.
2. Pin 2 - V- (GND): The negative power supply pin or ground pin.
3. Pin 3 - +IN: The non-inverting input pin of the op-amp.
4. Pin 4 - -IN: The inverting input pin of the op-amp.
5. Pin 5 - V+: The positive power supply pin.
The TLV6003 is a low-power, low-voltage operational amplifier, suitable for cost-sensitive and portable applications. It operates with a supply voltage range from 1.8V to 5.5V and is designed for general-purpose applications where low power consumption is a priority.
Manufacturer
The TLV6003DBVR is manufactured by Texas Instruments (TI). Texas Instruments is a global semiconductor company that designs and manufactures a wide range of integrated circuits and other electronic components. TI's products are used in various applications, including consumer electronics, automotive, industrial, and communications equipment. The company is known for its innovation and extensive portfolio, which includes analog chips, embedded processors, and digital light processors, among others. Texas Instruments has a long history in the electronics industry and is recognized as a leader in the development of semiconductors.
Application
The TLV6003DBVR is a low-power, low-voltage operational amplifier suitable for a variety of applications. Key areas of application include battery-operated devices, portable electronics, and sensor signal conditioning, where efficient power usage is essential. It can be used in medical instrumentation, consumer electronics, and wireless communication systems. Additionally, the TLV6003DBVR works well in active filters, audio processing, and analog-to-digital converter buffering. Its ability to operate efficiently at low voltages makes it ideal for applications requiring compact and energy-efficient solutions.
Package
The TLV6003DBVR is a single-channel operational amplifier from Texas Instruments, housed in a SOT-23-5 package. This package type is compact and suitable for surface-mount applications, providing a small footprint for space-constrained designs.
