Images à titre indicatif uniquement
S25FL256SAGMFIR01
+NomenclatureIC FLASH 256MBIT SPI/QUAD 16SOIC
-
FabricantCypress Semiconductor Inc
-
Pièce fabricant #S25FL256SAGMFIR01
-
Fiche technique S25FL256SAGMFIR01 DataSheet
-
Package SOP-16
-
En stock3325
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| Package / Case | Tube |
| Series | FL-S |
| Part Status | Active |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR |
| Memory Size | 256Mb (32M x 8) |
| Memory Interface | SPI - Quad I/O |
| Clock Frequency | 133 MHz |
| Voltage - Supply | 2.7V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
Présentation
Description
Key features of the S25FL256SAGMFIR01 include a 3.0V power supply, with a read speed of up to 133 MHz in SPI mode and support for Dual-I/O, Quad-I/O, and Quad Peripheral Interface (QPI) operations, enhancing data throughput. The device also includes advanced security features, such as sector protection options and a hardware-based write protection mechanism, alongside a 100,000 program/erase cycle endurance and a 20-year data retention capability.
Its compact design, coupled with robust performance and reliability, makes the S25FL256SAGMFIR01 ideal for systems that require efficient storage solutions with high-speed access and durability.
Equivalent
1. Micron MT25QL256ABA - Another 256Mb SPI NOR Flash.
2. Winbond W25Q256 - A similar 256Mb SPI NOR Flash.
3. Macronix MX25L256 - Also a 256Mb SPI NOR Flash.
These products offer similar capacity and SPI interface compatibility, making them suitable alternatives depending on specific design requirements and availability.
Features
1. Memory Architecture: It has a uniform 256 KB sector size with support for both single and dual quad I/O read and program operations.
2. Performance: Features high-performance read speeds up to 133 MHz in single, dual, and quad I/O modes.
3. Programming and Erase: Supports fast page programming and sector/block erase operations, enhancing data management efficiency.
4. Low Power Consumption: Designed with low power needs, supporting deep power-down modes to conserve energy.
5. Security: Equipped with a 256-bit unique ID and supports both hardware and software write protection features for data security.
6. Temperature Range: Operates within a wide temperature range of -40°C to +85°C, suitable for various industrial applications.
7. Reliability: Offers a high endurance of up to 100,000 program/erase cycles per sector and a data retention period of 20 years.
These characteristics make it suitable for applications requiring reliable and efficient non-volatile memory storage.
Pinout
Key pins and their functions include:
1. CS# (Chip Select): Enables the device.
2. SCK (Serial Clock): Provides the clock signal for SPI operations.
3. SO (Serial Output): Data output for SPI communication.
4. SI (Serial Input): Data input for SPI communication.
5. WP# (Write Protect): Used to protect certain sectors from being written.
6. HOLD# (Hold): Pauses the device operation in the middle of a transaction.
7. VCC (Power Supply): Provides the necessary power to the device.
8. VSS (Ground): Ground reference.
9. RESET#: Resets the device.
Additional pins might support advanced features or different modes of operation (like Quad I/O). Always refer to the specific datasheet for precise details and pin configurations.
Manufacturer
Application
1. Consumer Electronics: Used in devices like smartphones, tablets, and wearables for firmware storage.
2. Industrial Systems: Employed in automation and control systems for data logging and code storage.
3. Automotive Industry: Used in infotainment systems and advanced driver-assistance systems (ADAS).
4. Networking Equipment: Supports routers and switches for configuration and firmware updates.
5. IoT Devices: Provides storage for firmware and data in smart home and other IoT applications.
These applications benefit from its fast read/write capabilities, high endurance, and data retention features.