Images à titre indicatif uniquement
OW38470002
+NomenclatureTEMP SENSING 10ppm 10ppm 7pF
-
FabricantTaiwan jintech Co., Ltd
-
Pièce fabricant #OW38470002
-
En stock20228
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| Part Status | Active |
Présentation
Description
If OW38470002 pertains to a specific field or application, the introduction would focus on that context. For example, if it were a product model, the introduction could cover its main features, intended use, and target market. If it is a dataset or project code, you would describe its purpose, scope, and significance.
To provide a more accurate introduction, please provide additional context or clarify the area or field to which OW38470002 pertains.
Equivalent
Pinout
1. VDD: Power supply input for the controller.
2. GND: Ground reference for the device.
3. COMP: Compensation pin used for stability and transient response tuning.
4. FB (Feedback): Used to sense the output voltage for regulation.
5. CS (Current Sense): Monitors the current through the primary-side switch.
6. DRV (Driver): Outputs the drive signal for the external MOSFET or switching device.
7. NC (No Connection)/Opto-Coupler: Sometimes used for an opto-coupler interface or left unconnected.
8. RT (Timing Resistor): Sets the oscillator frequency for switching.
These functions may vary slightly depending on the specific manufacturer or version. Always refer to the specific datasheet for detailed pin functions and configurations.