NLV17SZ32DFT2G

NLV17SZ32DFT2G is a 32‑bit buffer/driver from Nexperia’s NLV17SZ family. It provides 32 non‑inverting buffer outputs with a single active‑low/ high‑side enable (3‑state) control, allowing you to connect and isolate a wide data bus as needed.
Key points:
- 32-bit, tri‑state buffer/line driver
- Low‑voltage operation (typical supply range around 1.65–3.6 V)
- One enable control to turn all outputs on/off (bus‑hold not assumed; check data sheet for OE behavior)
- Designed for buffering data between ICs (microcontrollers, memory, ASICs) and for bus interfacing
- Package variant DFT2G specifies a particular RoHS/compliance and footprint from the supplier
For exact pinout, supply voltage limits, propagation delays, power consumption, and recommended operating conditions, refer to the official datasheet. The DFT2G suffix denotes the specific packaging variant used for this part.

NLV17SZ32DFT2G is a 32‑bit, non‑inverting buffer/line driver with 3‑state outputs. Key features:
- 32‑bit wide, single enable (OE) to tri‑state all outputs
- Low‑voltage operation: Vcc = 1.65–3.6 V
- IOFF/power‑down support (high impedance when disabled)
- Low static and dynamic power; CMOS inputs
- ESD protection
- Industrial temperature range (-40°C to 125°C)
- Small package footprint (DFT2G)
Typical uses: data buffering, bus interfacing, and backplane buffering where a wide 32‑bit buffer is needed. Note: exact electrical specs (timing, exact voltage ranges, and package details) are in the official datasheet.

Pin count: 32 pins.
Function: NLV17SZ32DFT2G is a 32‑bit buffer/line driver with tri‑state outputs (32 non‑inverting buffers) controlled by a common output‑enable input, used to buffer and gate a 32‑bit data bus.

- Manufacturer: Nexperia.
- What kind of company: A global semiconductor company that designs and manufactures standard logic ICs and discrete components (e.g., buffers, gates, MOSFETs, ESD/protection devices) for automotive, industrial, and consumer electronics.

DFT2G.