Images à titre indicatif uniquement
MX25R3235FM2IL0
+NomenclatureIC FLASH 32MBIT SPI/QUAD 8SOP
-
FabricantWanghong
-
Pièce fabricant #MX25R3235FM2IL0
-
Fiche technique MX25R3235FM2IL0 DataSheet
-
En stock6938
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| Series | MXSMIO™ |
| Part Status | Active |
| Base Product Number | MX25R3235 |
| DigiKey Programmable | Not Verified |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR |
| Memory Size | 32Mbit |
| Memory Organization | 4M x 8 |
| Memory Interface | SPI - Quad I/O |
| Clock Frequency | 80 MHz |
| Write Cycle Time - Word, Page | 100µs, 10ms |
| Voltage - Supply | 1.65V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
| Package | 8-SOIC (0.209", 5.30mm Width) |
| Supplier Device Package | 8-SOP |
| Packaging | Tube |
Présentation
Description
Key features include support for standard, dual, and quad I/O SPI operations, which enhance data throughput. The MX25R3235FM2IL0 also has various power-saving modes such as deep power-down and ultra-deep power-down, enabling extended battery life in portable applications. Its fast read, program, and erase capabilities, along with a wide temperature range of -40°C to +85°C, make it versatile for use in consumer electronics, IoT devices, and wearable technology. Furthermore, it incorporates security features such as block protection and a unique ID for device identification and security enhancement.
Equivalent
1. Winbond W25Q32JV - 32Mb serial NOR flash memory.
2. Micron MT25QL032 - 32Mb serial NOR flash memory.
3. Cypress (Infineon) S25FL032P - 32Mb serial NOR flash memory.
4. Adesto/Dialogs AT25SF321 - 32Mb serial NOR flash memory.
Ensure to check specific features such as voltage, speed, and package type for compatibility.
Features
1. Memory Size: 32 Mb (megabits).
2. Interface: SPI (Serial Peripheral Interface) with Dual I/O and Quad I/O for enhanced data transfer speeds.
3. Supply Voltage: Operates at a low voltage range of 1.65V to 3.6V.
4. Low Power Consumption: Optimized for energy efficiency, suitable for battery-powered devices.
5. Fast Read Speed: High read speeds for quick data access.
6. Reliability: Endurance of up to 100,000 program/erase cycles and data retention of over 20 years.
7. Security Features: Offers protection mechanisms like block protection and security registers to safeguard data.
8. Package Type: Available in compact packages suitable for space-constrained applications.
These features make the MX25R3235FM2IL0 ideal for use in diverse applications such as IoT devices, wearables, and consumer electronics where low power and high reliability are crucial.
Pinout
The primary functions of the pins are as follows:
1. CS# (Chip Select): Activates the device when low.
2. CLK (Clock): Synchronizes data transmission on the bus.
3. SI/SIO0 (Serial Input/Output 0): Receives instructions and data; also serves as I/O in quad I/O mode.
4. SO/SIO1 (Serial Output/Output 1): Sends data out; also serves as I/O in quad I/O mode.
5. WP# (Write Protect): Protects against writing to the device; acts as I/O in quad mode.
6. VCC (Supply Voltage): Powers the device.
7. GND (Ground): Ground reference.
8. HOLD#/SIO3 (Hold/Serial I/O 3): Pauses serial communication; also serves as I/O in quad mode.
These pins facilitate standard features such as read, write, and erase operations, along with advanced functions like deep power-down for power efficiency. Always refer to the specific data sheet from Macronix for exact details and electrical specifications.
Manufacturer
Application
Package
Frequently Asked Questions
Q: Is this MX25R3235FM2IL0 a non-volatile memory device?
A: Yes, it is a Non-Volatile FLASH memory, retaining data without power.
Q: What is the memory size and organization of this Macronix chip?
A: It has 32Mbit capacity, organized as 4M x 8 bits for flexible data storage.
Q: What is the maximum clock frequency for SPI communication?
A: It supports an 80 MHz clock frequency for high-speed data transfer.
Q: Can this device operate with a dual- or quad-I/O interface?
A: Yes, it supports SPI and Quad I/O interface for enhanced read/write performance.
Q: What is the operating voltage range for this flash memory?
A: It operates from 1.65V to 3.6V, suitable for low-power designs.
Q: What is the typical write cycle time for page programming?
A: Page write cycle time is 10ms; word write is 100µs for fast programming.
Q: What package type does this part come in?
A: It is supplied in an 8-SOP (8-SOIC, 5.30mm width) surface-mount package.