Images à titre indicatif uniquement
MX25L3236FM2I-08G
+NomenclatureIC FLASH 32MBIT SPI/QUAD 8SOP
-
FabricantWanghong
-
Pièce fabricant #MX25L3236FM2I-08G
-
En stock17426
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| Series | MXSMIO™ |
| Part Status | Active |
| Base Product Number | MX25L3236 |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR (SLC) |
| Memory Size | 32Mbit |
| Memory Organization | 1M x 32, 2M x 16, 4M x 8 |
| Memory Interface | SPI - Quad I/O |
| Clock Frequency | 133 MHz |
| Write Cycle Time - Word, Page | 50µs, 1.2ms |
| Voltage - Supply | 2.65V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209", 5.30mm Width) |
| Supplier Device Package | 8-SOP |
| Packaging | Tube |
| Access Time | 6 ns |
Présentation
Description
MX25L3236FM2I-08G is Macronix’s 32-Mbit SPI NOR flash memory. It provides non-volatile storage for embedded systems (firmware, data, boot code).
Key points:
- Capacity: 32 Mbit (4 MB)
- Interface: Serial SPI; supports standard SPI and higher-speed/Quad I/O modes on compatible variants
- Voltage: 2.7–3.6 V (3.3 V typical)
- Package: 8-pin (e.g., SOIC/SOP or similar)
- Memory organization: sectors (commonly 4 KB), blocks (e.g., 64 KB), with bulk erase options
- Operations: page program (typically up to 256-byte pages), sector/block erase, read and fast-read modes; write-enable/ protection mechanisms; deep power-down
- Features: low-power standby, security features (write protection, status/security registers), XIP compatibility in some modes
- Applications: firmware storage and boot memory, code/data storage in microcontrollers and embedded systems
For exact timing, package options, and command set details, refer to the MX25L3236FM2I-08G datasheet.
Key points:
- Capacity: 32 Mbit (4 MB)
- Interface: Serial SPI; supports standard SPI and higher-speed/Quad I/O modes on compatible variants
- Voltage: 2.7–3.6 V (3.3 V typical)
- Package: 8-pin (e.g., SOIC/SOP or similar)
- Memory organization: sectors (commonly 4 KB), blocks (e.g., 64 KB), with bulk erase options
- Operations: page program (typically up to 256-byte pages), sector/block erase, read and fast-read modes; write-enable/ protection mechanisms; deep power-down
- Features: low-power standby, security features (write protection, status/security registers), XIP compatibility in some modes
- Applications: firmware storage and boot memory, code/data storage in microcontrollers and embedded systems
For exact timing, package options, and command set details, refer to the MX25L3236FM2I-08G datasheet.
Equivalent
Equivalent drop-in parts (32-Mbit SPI flash, 8-pin package, similar voltage) include:
- Winbond W25Q32FV / W25Q32JV
- GigaDevice GD25Q32CSIG / GD25Q32B
- ISSI IS25LP032D
- Cypress/Spansion S25FL032P
- Puya P25Q32L
Note: verify exact speed, voltage range, and package to ensure full compatibility.
- Winbond W25Q32FV / W25Q32JV
- GigaDevice GD25Q32CSIG / GD25Q32B
- ISSI IS25LP032D
- Cypress/Spansion S25FL032P
- Puya P25Q32L
Note: verify exact speed, voltage range, and package to ensure full compatibility.
Features
Here are the key features of MX25L3236FM2I-08G:
- 32-Mbit (4 MB) serial NOR flash memory.
- Voltage: 2.7–3.6 V (3.0 V nominal).
- SPI serial interface with support for standard SPI and Dual/Quad I/O modes for higher throughput.
- Page size: 256 bytes.
- Erase architecture: 4 KB sectors; 64 KB blocks; full-chip erase option.
- Read speeds: Fast/standard read; supports Dual/Quad I/O fast read (high-speed mode).
- Power management: Deep Power-Down mode and Wake-Up; low active current.
- Endurance and retention: typical erase cycles per sector (e.g., ~100k); data retention suitable for long-term storage.
- Security and protection: block protection, software/ hardware protection options, and possible security features.
- Operating temperature: Industrial range, approx. -40°C to +85°C.
- Package: 8-pin package (08G), suitable for compact designs.
Note: Specific timing, endurance, and feature details can vary by revision; consult the datasheet for exact numbers.
- 32-Mbit (4 MB) serial NOR flash memory.
- Voltage: 2.7–3.6 V (3.0 V nominal).
- SPI serial interface with support for standard SPI and Dual/Quad I/O modes for higher throughput.
- Page size: 256 bytes.
- Erase architecture: 4 KB sectors; 64 KB blocks; full-chip erase option.
- Read speeds: Fast/standard read; supports Dual/Quad I/O fast read (high-speed mode).
- Power management: Deep Power-Down mode and Wake-Up; low active current.
- Endurance and retention: typical erase cycles per sector (e.g., ~100k); data retention suitable for long-term storage.
- Security and protection: block protection, software/ hardware protection options, and possible security features.
- Operating temperature: Industrial range, approx. -40°C to +85°C.
- Package: 8-pin package (08G), suitable for compact designs.
Note: Specific timing, endurance, and feature details can vary by revision; consult the datasheet for exact numbers.
Pinout
Pin count: 8 pins.
Function: 32‑Mb (4‑MB) serial flash memory with SPI interface (used for firmware/data storage). Pins provide CS, SCK, SI (MOSI), SO (MISO), WP#, HOLD#, VCC, and GND, operating typically at 2.7–3.6 V.
Function: 32‑Mb (4‑MB) serial flash memory with SPI interface (used for firmware/data storage). Pins provide CS, SCK, SI (MOSI), SO (MISO), WP#, HOLD#, VCC, and GND, operating typically at 2.7–3.6 V.
Manufacturer
- Manufacturer: Macronix International Corporation, Ltd. (MXIC).
- What kind of company: A Taiwan-based semiconductor company that designs and manufactures non-volatile memory ICs (NOR/NAND flash and related memory products); an integrated device manufacturer (IDM) in the memory sector.
- What kind of company: A Taiwan-based semiconductor company that designs and manufactures non-volatile memory ICs (NOR/NAND flash and related memory products); an integrated device manufacturer (IDM) in the memory sector.
Application
MX25L3236FM2I-08G is a 32‑Mbit serial Flash (SPI with dual/quad I/O). Common application areas:
- Firmware storage and boot code for MCUs/SoCs
- In-system/firmware updates and bootloader recovery
- Non-volatile data and configuration storage in IoT devices, industrial controllers, sensors
- Caching/buffer memory and resource storage for consumer electronics (set‑top boxes, printers, media players)
- Small-footprint storage for wearables and networking equipment, and other embedded applications needing fast, low‑pin SPI Flash
- Firmware storage and boot code for MCUs/SoCs
- In-system/firmware updates and bootloader recovery
- Non-volatile data and configuration storage in IoT devices, industrial controllers, sensors
- Caching/buffer memory and resource storage for consumer electronics (set‑top boxes, printers, media players)
- Small-footprint storage for wearables and networking equipment, and other embedded applications needing fast, low‑pin SPI Flash
Package
8-pin SOP (SOIC-8) surface-mount package; RoHS-compliant.
