Images à titre indicatif uniquement
IC FLASH 128MBIT SPI/QUAD 8SOP A
-
FabricantWanghong
-
Pièce fabricant #MX25L12833FM2R-10G
-
En stock6178
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| Series | MXSMIO™ |
| Part Status | Active |
| Base Product Number | MX25L12833 |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR (SLC) |
| Memory Size | 128Mbit |
| Memory Organization | 32M x 4, 64M x 2, 128M x 1 |
| Memory Interface | SPI - Quad I/O, QPI |
| Clock Frequency | 104 MHz |
| Voltage - Supply | 2.7V ~ 3.6V |
| Operating Temperature | -40°C ~ 105°C (TA) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209", 5.30mm Width) |
| Supplier Device Package | 8-SOP |
| Packaging | Tube |
Présentation
Description
MX25L12833FM2R-10G is a Macronix 128-Mbit serial flash memory (16 MB) in the MX25L family. Key points:
- Interface: SPI-compatible; supports standard (single) SPI, plus Dual SPI and Quad I/O (QIO) modes for higher throughput.
- Organization: 16 MB total; typical sector/block layout (e.g., 4 KB sectors, 64 KB/ larger blocks) with 256-byte pages.
- Features: Write Enable/Disable, WIP status bit, sector/block protection, security/OTP area, fast and continuous read, and Quad Enable (QE) for QIO access; supports deep power-down.
- Voltage: 2.7–3.6 V supply.
- Package: 8-pin package (e.g., SO8/US8).
- Applications: firmware/storage and updates for MCUs, microcontrollers, FPGAs/SoCs, boot memory for embedded systems.
- Commands: typical SPI command set (Read 03, Fast Read 0B, Page Program 02, Sector Erase 20, Block Erase D8, Chip Erase C7, Write Enable 06, Read Status 05/35, etc.).
- Note: For exact timings, page/sector sizes, and the -10G speed grade, refer to the datasheet.
- Interface: SPI-compatible; supports standard (single) SPI, plus Dual SPI and Quad I/O (QIO) modes for higher throughput.
- Organization: 16 MB total; typical sector/block layout (e.g., 4 KB sectors, 64 KB/ larger blocks) with 256-byte pages.
- Features: Write Enable/Disable, WIP status bit, sector/block protection, security/OTP area, fast and continuous read, and Quad Enable (QE) for QIO access; supports deep power-down.
- Voltage: 2.7–3.6 V supply.
- Package: 8-pin package (e.g., SO8/US8).
- Applications: firmware/storage and updates for MCUs, microcontrollers, FPGAs/SoCs, boot memory for embedded systems.
- Commands: typical SPI command set (Read 03, Fast Read 0B, Page Program 02, Sector Erase 20, Block Erase D8, Chip Erase C7, Write Enable 06, Read Status 05/35, etc.).
- Note: For exact timings, page/sector sizes, and the -10G speed grade, refer to the datasheet.
Equivalent
Equivalent parts (128-Mbit Quad-SPI NOR Flash, 3V, 8-pin):
- Winbond W25Q128FV/JV
- GigaDevice GD25Q128C/CS
- Micron N25Q128A
- ISSI IS25LP128D
- Spansion/Cypress S25FL128S
Note: check voltage, package, timing and command compatibility for exact cross-reference.
- Winbond W25Q128FV/JV
- GigaDevice GD25Q128C/CS
- Micron N25Q128A
- ISSI IS25LP128D
- Spansion/Cypress S25FL128S
Note: check voltage, package, timing and command compatibility for exact cross-reference.
Features
Key features of MX25L12833FM2R-10G:
- Density: 128-Mbit Serial NOR Flash (16 MB).
- Interface and speed: SPI interface with Single, Dual, and Quad I/O reads; up to ~104 MHz read clock.
- Memory organization: 256-byte page size; 4 KB sectors; 64 KB blocks.
- Erase/Program: Page program supported; sector/block erase operations; full-device erase option.
- Protection/Security: Block protection (BP) bits; hardware write protection; WIP/WEL status; 64-bit unique ID.
- Power and sleep: Deep Power-Down mode for low power; fast resume from DP/idle.
- Endurance/retention: Typical program/erase endurance ~100k cycles; data retention around 20 years.
- Operating conditions: Industrial temperature range, typically -40°C to +85°C.
- Package: 8-pin package (e.g., SO8/US8) suitable for compact PCBs.
- Additional: Standard read, fast read, and compatibility with common flash memory command set; HOLD/WP# pins for hardware protection.
- Density: 128-Mbit Serial NOR Flash (16 MB).
- Interface and speed: SPI interface with Single, Dual, and Quad I/O reads; up to ~104 MHz read clock.
- Memory organization: 256-byte page size; 4 KB sectors; 64 KB blocks.
- Erase/Program: Page program supported; sector/block erase operations; full-device erase option.
- Protection/Security: Block protection (BP) bits; hardware write protection; WIP/WEL status; 64-bit unique ID.
- Power and sleep: Deep Power-Down mode for low power; fast resume from DP/idle.
- Endurance/retention: Typical program/erase endurance ~100k cycles; data retention around 20 years.
- Operating conditions: Industrial temperature range, typically -40°C to +85°C.
- Package: 8-pin package (e.g., SO8/US8) suitable for compact PCBs.
- Additional: Standard read, fast read, and compatibility with common flash memory command set; HOLD/WP# pins for hardware protection.
Pinout
- Pin count: 8 pins (8-pin package, e.g., SOIC/US8)
- Function: 128 Mbit serial flash memory with SPI interface (supports standard, and dual/quad SPI modes), used for storing firmware/data (3.3 V operation).
- Function: 128 Mbit serial flash memory with SPI interface (supports standard, and dual/quad SPI modes), used for storing firmware/data (3.3 V operation).
Manufacturer
- Manufacturer: Macronix International Corp., Ltd. (Macronix)
- What kind of company: A Taiwanese semiconductor company and integrated device manufacturer (IDM) that designs, manufactures, and sells non-volatile memory ICs (NOR/NAND flash, ROM) and related memory solutions.
- What kind of company: A Taiwanese semiconductor company and integrated device manufacturer (IDM) that designs, manufactures, and sells non-volatile memory ICs (NOR/NAND flash, ROM) and related memory solutions.
Application
MX25L12833FM2R-10G is a 128Mb SPI Serial NOR flash. Common application areas:
- Embedded systems: boot/firmware flash and executable code storage for MCUs/MPUs
- Automotive & industrial electronics: program storage, configuration data, safe firmware updates
- Consumer electronics & IoT: firmware storage, OTA updates, data logging
- Networking/telecom equipment: OS/firmware storage, bootloaders, persistent config
- Prototyping/development boards: external flash for code and data storage
These use cases benefit from non-volatile, high-density storage with low pin count and low power.
- Embedded systems: boot/firmware flash and executable code storage for MCUs/MPUs
- Automotive & industrial electronics: program storage, configuration data, safe firmware updates
- Consumer electronics & IoT: firmware storage, OTA updates, data logging
- Networking/telecom equipment: OS/firmware storage, bootloaders, persistent config
- Prototyping/development boards: external flash for code and data storage
These use cases benefit from non-volatile, high-density storage with low pin count and low power.
Package
8-pin SOIC (SOP-8) package, RoHS Pb-free (G variant).
