MT29F4G08ABBDAH4:D

MT29F4G08ABBDAH4:D is Micron’s 4 Gbit NAND flash memory. Key points:
- Data path: x8 interface; ONFI-compatible; 1.8V I/O (Vcc ~1.8V).
- Organization: about 4,194,304 pages of 2 KB data each with a small spare area (OOB); blocks are multi-page (typical 128 pages per block; ~256 KB per block).
- Type: MLC NAND, non-volatile storage; requires a NAND controller with ECC and wear leveling.
- Access: standard NAND flash command set (read, program/write, erase block).
- Endurance/retention: endurance in the low thousands of program/erase cycles; long data retention with proper wear-leveling.
- Suffixes (e.g., D) indicate temperature/packaging grade; check the datasheet for exact operating range and pinout.
For exact page size, block size, timings, ECC requirements, and temperature range, consult the MT29F4G08ABBDAH4:D datasheet or Micron product page.

MT29F4G08ABBDAH4:D is Micron’s 4-Gbit, x8 NAND flash. Direct equivalents depend on voltage/packaging, but common cross-refs include:
- Spansion/Cypress S34ML04G2 (4Gbit, x8)
- Toshiba/Kioxia THGB4G08DLA (4Gbit, x8)
- Winbond W29N04G (4Gbit, x8)
For exact matching, use Micron’s cross-reference tool or distributor catalogs.

Pin count: 48 pins (FBGA 48).
Function: Micron MT29F4G08ABBDAH4:D is a 4 Gbit NAND flash memory with an x8 data bus (non-volatile storage). It uses the standard NAND interface signals (CLE, ALE, CE#, WE#, RE#, R/B#, DQ0–DQ7, address lines A0–A21, along with Vcc, Vccq, and GND).

- Manufacturer: Micron Technology, Inc.
- Company type: American multinational semiconductor company specializing in memory and storage products (DRAM and NAND Flash), one of the world's largest memory manufacturers, headquartered in Boise, Idaho.

MT29F4G08ABBDAH4:D is a 4 Gbit, 8-bit NAND flash. Common application areas:
- Embedded non-volatile storage in consumer electronics (digital cameras, camcorders, set-top boxes, handheld devices)
- Removable storage media and embedded modules (USB flash drives, memory cards)
- Boot/firmware storage and data logging in embedded/industrial equipment
- Entry-level solid-state storage and caching in cost-sensitive devices
- IoT/edge devices needing compact, reliable NAND storage

TSOP II 52-pin (Thin Small‑Outline Package) NAND flash.