Images à titre indicatif uniquement
MPZ2012S221AT000
+NomenclatureFERRITE BEAD 220 OHM 0805 1LN
-
FabricantSociété TDK
-
Pièce fabricant #MPZ2012S221AT000
-
Fiche technique MPZ2012S221AT000 DataSheet
-
En stock14409
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| Series | MPZ |
| PartStatus | Active |
| FilterType | Power Line |
| NumberofLines | 1 |
| Impedance@Frequency | 220 Ohms @ 100 MHz |
| CurrentRating(Max) | 3A |
| DCResistance(DCR)(Max) | 40mOhm |
| OperatingTemperature | -55°C ~ 125°C |
| Package/Case | 0805 (2012 Metric) |
| MountingType | Surface Mount |
| Height(Max) | 0.041" (1.05mm) |
| Size/Dimension | 0.079" L x 0.049" W (2.00mm x 1.25mm) |
Présentation
Description
The MPZ2012S221AT000 is a surface-mount multilayer ferrite bead manufactured by TDK Corporation. It is designed for EMI (Electromagnetic Interference) suppression in electronic circuits. The "MPZ" series is known for its high impedance and noise filtering capabilities, making it suitable for various applications, including smartphones, tablets, and other compact electronic devices.
Key specifications include its size, typically in the 2012 metric package (2.0mm x 1.25mm), and its rated impedance, which is 220 ohms at 100 MHz. The "AT" in the part number often indicates the specific tolerance or temperature rating. This component is used to suppress high-frequency noise in signal and power lines, thereby improving the overall performance and reliability of electronic devices.
The ferrite bead offers a compact, reliable solution for noise suppression, helping to meet compliance with EMI regulations and ensuring efficient operation of electronic circuits. Its multilayer design enhances its effectiveness in reducing unwanted electromagnetic interference.
Key specifications include its size, typically in the 2012 metric package (2.0mm x 1.25mm), and its rated impedance, which is 220 ohms at 100 MHz. The "AT" in the part number often indicates the specific tolerance or temperature rating. This component is used to suppress high-frequency noise in signal and power lines, thereby improving the overall performance and reliability of electronic devices.
The ferrite bead offers a compact, reliable solution for noise suppression, helping to meet compliance with EMI regulations and ensuring efficient operation of electronic circuits. Its multilayer design enhances its effectiveness in reducing unwanted electromagnetic interference.
Equivalent
The MPZ2012S221AT000 is a multilayer SMD ferrite bead. Equivalent products with similar specifications can include:
1. Murata BLM21PG221SN1D
2. TDK MMZ2012S221AT000
3. Taiyo Yuden BK2125HS221-T
4. Samsung EMIFIL CMB2012S221T
Ensure to verify the specifications, such as impedance, current rating, and size, with the manufacturer's datasheets to confirm compatibility.
1. Murata BLM21PG221SN1D
2. TDK MMZ2012S221AT000
3. Taiyo Yuden BK2125HS221-T
4. Samsung EMIFIL CMB2012S221T
Ensure to verify the specifications, such as impedance, current rating, and size, with the manufacturer's datasheets to confirm compatibility.
Features
The MPZ2012S221AT000 is a type of multilayer chip inductor or ferrite bead, typically used in electronic circuits to suppress high-frequency noise and electromagnetic interference (EMI). Here are its key features:
1. Impedance: It has an impedance value, usually measured in ohms, which indicates its effectiveness in blocking noise. For this specific component, the impedance is typically around 220 ohms at 100 MHz.
2. Size: The component dimensions are often compact, typically in a 2012 metric package (2.0 mm x 1.2 mm), making it suitable for high-density PCB applications.
3. Rated Current: It has a specified maximum current rating it can handle without overheating or performance degradation.
4. DC Resistance (DCR): This indicates the resistance offered by the inductor at DC, usually measured in milliohms.
5. Application: Commonly used in power supply lines, signal lines, and for general EMI suppression in various consumer electronics, automotive, and communication devices.
6. Temperature Range: Operates effectively over a wide temperature range, suitable for various environmental conditions.
These features make it essential for maintaining signal integrity in electronic circuits.
1. Impedance: It has an impedance value, usually measured in ohms, which indicates its effectiveness in blocking noise. For this specific component, the impedance is typically around 220 ohms at 100 MHz.
2. Size: The component dimensions are often compact, typically in a 2012 metric package (2.0 mm x 1.2 mm), making it suitable for high-density PCB applications.
3. Rated Current: It has a specified maximum current rating it can handle without overheating or performance degradation.
4. DC Resistance (DCR): This indicates the resistance offered by the inductor at DC, usually measured in milliohms.
5. Application: Commonly used in power supply lines, signal lines, and for general EMI suppression in various consumer electronics, automotive, and communication devices.
6. Temperature Range: Operates effectively over a wide temperature range, suitable for various environmental conditions.
These features make it essential for maintaining signal integrity in electronic circuits.
Pinout
The MPZ2012S221AT000 is a multilayer chip bead inductor manufactured by TDK Corporation. It is part of the MPZ series and is primarily used for EMI suppression in electronic circuits. The component is designed in a 2012 metric size package, which is equivalent to 0805 in inches.
The MPZ2012S221AT000 is a passive, two-terminal device. As such, it has two pins or connection points. These terminals are used to connect the component in series with the circuit path where EMI suppression is required.
Its primary function is to provide impedance at high frequencies, thereby reducing electromagnetic interference (EMI) and radio frequency interference (RFI) in circuits. The part number "221" indicates an inductance value of 220 µH. It is suitable for various applications, including power lines and signal lines, where noise suppression is critical.
For complete specifications, including electrical characteristics like impedance, DC resistance, and current rating, consulting the manufacturer's datasheet is recommended.
The MPZ2012S221AT000 is a passive, two-terminal device. As such, it has two pins or connection points. These terminals are used to connect the component in series with the circuit path where EMI suppression is required.
Its primary function is to provide impedance at high frequencies, thereby reducing electromagnetic interference (EMI) and radio frequency interference (RFI) in circuits. The part number "221" indicates an inductance value of 220 µH. It is suitable for various applications, including power lines and signal lines, where noise suppression is critical.
For complete specifications, including electrical characteristics like impedance, DC resistance, and current rating, consulting the manufacturer's datasheet is recommended.
Manufacturer
The MPZ2012S221AT000 is manufactured by TDK Corporation. TDK is a multinational electronics company based in Japan. Founded in 1935, TDK specializes in electronic components, modules, and systems. The company is known for its development of ferrite cores, inductors, capacitors, sensors, and other electronic components. TDK serves a wide range of industries, including automotive, information and communications technology, industrial equipment, and consumer electronics. The company is committed to innovation and sustainability, continuously working on advanced technologies and solutions that contribute to the growth and transformation of various sectors.
Application
The MPZ2012S221AT000 is a multilayer chip inductor commonly used in various electronic applications. Its primary application areas include power supply modules, RF circuits, and signal line noise suppression. It is often utilized in smartphones, tablets, computers, and other consumer electronics for EMI suppression and to ensure stable signal integrity. Additionally, it can be used in automotive electronics and communication equipment to improve performance by minimizing high-frequency noise. Its compact size and efficient performance make it suitable for high-density mounting on PCBs.
Package
The MPZ2012S221AT000 is a surface-mount ceramic multilayer chip inductor with a 2012 package size, which corresponds to 2.0mm x 1.25mm dimensions. It's commonly used in various electronic circuits for signal processing and noise filtering.
