MP5017GD-Z

MP5017GD-Z is a high-efficiency synchronous buck regulator from Monolithic Power Systems. It converts a higher DC input to a lower, regulated output rail used for processor cores, memory, FPGAs, and other point‑of‑load applications. The device integrates the main switching MOSFETs and control circuitry, typically using current‑mode PWM and an external feedback network to set the output voltage. It includes protections such as over‑current, over‑temperature, and undervoltage, along with an enable/shutdown control and soft‑start to limit inrush. The GD‑Z suffix indicates a RoHS‑compliant, lead‑free (green) package. Common applications include VRMs for CPUs/GPUs, telecom/industrial DC‑DC rails, and other system power supplies. For exact electrical specs, pinout, and recommended external components, consult the official MP5017GD‑Z datasheet.

Here are the typical features of MP5017GD-Z (Monolithic Power Systems):
- Wide input range up to 60V
- Synchronous buck regulator with integrated high-side and low-side MOSFETs
- Output current capability in the amp range (commonly up to ~4A)
- Adjustable output via external feedback resistors
- Current-mode PWM control for fast transient response
- Soft-start and enable/shutdown control
- Protection: overcurrent/short-circuit, overvoltage, thermal shutdown, and UVLO
- High efficiency for reduced heat and smaller cooling needs
- Small, RoHS-compliant package (GD-Z variant, suitable for compact designs)
Note: exact electrical specs (current limit, switching frequency, exact input range, package type) can vary by lot and variant. Please refer to the official datasheet for precise values for MP5017GD-Z.

- Pin count: 8 pins (8-pin package, e.g., QFN/SOP-8)
- Function: High-efficiency synchronous buck regulator (step-down DC-DC converter) with an integrated high-side switch. It uses VIN, GND, EN, FB, LX/SW (switch node), BST (bootstrap) and related pins for gate drive and feedback.

- Manufacturer: Monolithic Power Systems, Inc. (MPS).
- What kind of company: A fabless semiconductor company that designs and sells high-performance analog and mixed-signal power-management ICs (e.g., DC-DC converters, PMICs, LED drivers).

MP5017GD-Z is a high‑efficiency buck regulator. Typical applications include:
- Portable electronics (smartphones, tablets, wearables, cameras) for core rails
- Computer/IT systems (laptops, motherboards, GPUs/ASIC VRMs)
- Displays and backlighting (LED driver power and screen rails)
- Networking/communications (routers, switches, base stations)
- Industrial/embedded equipment (motor drivers, sensors, data acquisition)
- AC/DC adapters and auxiliary power supplies
Note: Use cases are for regulated, high‑efficiency step‑down power in common power‑management scenarios.

QFN-16 package (4x4 mm) with an exposed pad; Pb-free (RoHS-compliant).