Images à titre indicatif uniquement
LPC54606J256BD100
+NomenclatureRISC Microcontroller, 32-Bit, FL
-
FabricantFlip ÉLECTRONIQUE
-
Pièce fabricant #LPC54606J256BD100
-
En stock7584
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| Part Status | Active |
| Packaging | Tray |
Présentation
Description
LPC54606J256BD100 is an NXP 32‑bit microcontroller from the LPC546xx family. It uses an ARM Cortex‑M4F core and runs up to about 120 MHz, with on‑chip flash and RAM.
Key points:
- Core: ARM Cortex‑M4F (DSP instructions, floating‑point unit)
- Speed: up to ~120 MHz
- Memory: on‑chip flash (typically 256 KB) and RAM (typical sizes in the family; check datasheet for exact)
- Peripherals: broad mix of serial interfaces (USART/UART, SPI, I2C, I2S), USB device support, analog peripherals (ADCs, DACs), timers/PWMs, and other system peripherals
- Power & package: designed for low‑power embedded use; BD100 denotes a specific package/variant in the line
- Toolchain: supported by MCUXpresso and CMSIS/DSP libraries; good for embedded control, audio, sensing, and connectivity
For exact memory sizes, pinout, and peripheral details, refer to the LPC54606J256BD100 datasheet and user manual on NXP’s website.
Key points:
- Core: ARM Cortex‑M4F (DSP instructions, floating‑point unit)
- Speed: up to ~120 MHz
- Memory: on‑chip flash (typically 256 KB) and RAM (typical sizes in the family; check datasheet for exact)
- Peripherals: broad mix of serial interfaces (USART/UART, SPI, I2C, I2S), USB device support, analog peripherals (ADCs, DACs), timers/PWMs, and other system peripherals
- Power & package: designed for low‑power embedded use; BD100 denotes a specific package/variant in the line
- Toolchain: supported by MCUXpresso and CMSIS/DSP libraries; good for embedded control, audio, sensing, and connectivity
For exact memory sizes, pinout, and peripheral details, refer to the LPC54606J256BD100 datasheet and user manual on NXP’s website.
Features
LPC54606J256BD100 features (highlights):
- 32-bit ARM Cortex-M4F core with DSP instructions and FPU
- Up to 120 MHz operation
- On-chip memory: 256 KB Flash, 64 KB SRAM
- FlexComm multi-protocol serials: UART, SPI, I2C (pin- and peripheral-mlexable)
- USB 2.0 Full-Speed device with on-chip PHY
- 12-bit analog capabilities: ADC with multiple channels
- Timers, PWM and capture/compare units
- DMA controller for efficient data transfers
- CRC engine for fast data integrity checks
- GPIOs with configurable alternate functions
- Power-management: multiple low-power modes and wakeup sources
- Debug/boot support: JTAG/SWD, easy in-system programming
Note: exact pin count/package options may vary by variant; this summary reflects typical LPC54606 family features.
- 32-bit ARM Cortex-M4F core with DSP instructions and FPU
- Up to 120 MHz operation
- On-chip memory: 256 KB Flash, 64 KB SRAM
- FlexComm multi-protocol serials: UART, SPI, I2C (pin- and peripheral-mlexable)
- USB 2.0 Full-Speed device with on-chip PHY
- 12-bit analog capabilities: ADC with multiple channels
- Timers, PWM and capture/compare units
- DMA controller for efficient data transfers
- CRC engine for fast data integrity checks
- GPIOs with configurable alternate functions
- Power-management: multiple low-power modes and wakeup sources
- Debug/boot support: JTAG/SWD, easy in-system programming
Note: exact pin count/package options may vary by variant; this summary reflects typical LPC54606 family features.
Pinout
- Pin count: 256 pins (LQFP-256 package)
- Function: NXP LPC54606J256BD100 is a 32‑bit ARM Cortex‑M4F microcontroller (embedded control MCU) with on‑chip flash/RAM and integrated peripherals for general embedded applications.
- Function: NXP LPC54606J256BD100 is a 32‑bit ARM Cortex‑M4F microcontroller (embedded control MCU) with on‑chip flash/RAM and integrated peripherals for general embedded applications.
Manufacturer
- Manufacturer: NXP Semiconductors.
- What kind of company: A Dutch multinational semiconductor company that designs and manufactures integrated circuits and embedded processing solutions (originating from Philips Semiconductors), with global fabrication, R&D, and automotive/security/IoT market focus.
- What kind of company: A Dutch multinational semiconductor company that designs and manufactures integrated circuits and embedded processing solutions (originating from Philips Semiconductors), with global fabrication, R&D, and automotive/security/IoT market focus.
Application
Typical application areas for the LPC54606J256BD100 include:
- IoT edge devices, sensor hubs and gateways (low-power DSP for data processing)
- Industrial automation and motor-control subsystems
- USB peripherals and audio interfaces (I2S/DSP capabilities)
- Human–machine interfaces and embedded displays (LCD/touch)
- Consumer electronics, portable instruments and wearables
- Medical/healthcare devices needing compact, low-power control
- General embedded control in appliances and smart devices
(Note: Cortex-M4F with DSP features, USB/I2S, ADC/DAC, timers make it suitable for these use cases.)
- IoT edge devices, sensor hubs and gateways (low-power DSP for data processing)
- Industrial automation and motor-control subsystems
- USB peripherals and audio interfaces (I2S/DSP capabilities)
- Human–machine interfaces and embedded displays (LCD/touch)
- Consumer electronics, portable instruments and wearables
- Medical/healthcare devices needing compact, low-power control
- General embedded control in appliances and smart devices
(Note: Cortex-M4F with DSP features, USB/I2S, ADC/DAC, timers make it suitable for these use cases.)
Package
LQFP-100 package (100-pin thin quad-flat package).
