Images à titre indicatif uniquement
IR1161LTRPBF
+NomenclatureSYNCRONOUS RECTIFIER CONTROL IC
-
FabricantTechnologie Infineon
-
Pièce fabricant #IR1161LTRPBF
-
Fiche technique IR1161LTRPBF DataSheet
-
Package SOT-23-5
-
En stock1256
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| Series | SmartRectifier™ |
| ProductStatus | Not For New Designs |
| Applications | Secondary-Side Controller, Synchronous Rectifier |
| Voltage-Supply | 4.75V ~ 18V |
| Current-Supply | 5 mA |
| OperatingTemperature | -40°C ~ 125°C |
| MountingType | Surface Mount |
| Package/Case | SC-74A, SOT-753 |
Présentation
Description
Notable characteristics include its low start-up and operating current, which further contributes to its energy-saving capabilities. Additionally, the IR1161LTRPBF offers protection features such as over-current protection, ensuring reliability and robustness in diverse application environments. It is commonly used in applications like switch-mode power supplies, where improved energy efficiency and thermal performance are critical. Overall, the IR1161LTRPBF provides a cost-effective solution for increasing the efficiency of power conversion systems.
Equivalent
1. NCP4305 (ON Semiconductor) - Secondary side synchronous rectifier driver.
2. UCC24610 (Texas Instruments) - Synchronous rectifier controller for isolated power supplies.
3. SRK1000 (STMicroelectronics) - Secondary-side synchronous rectification controller.
These alternatives offer similar functionalities and can be used in similar applications to the IR1161LTRPBF. Always compare datasheets to ensure compatibility with your specific design requirements.
Features
1. Synchronous Rectification Control: Enhances efficiency by replacing traditional diodes with MOSFETs for rectification, reducing power loss.
2. Wide Input Voltage Range: Supports a broad range of input voltages, making it versatile for different applications.
3. Programmable Turn-off Threshold: Allows customization of the turn-off voltage threshold to optimize performance according to specific needs.
4. Fast Turn-off Response: Designed for quick turn-off to minimize reverse current and improve overall efficiency.
5. Low Standby Power Consumption: Ensures minimal power use during standby, contributing to overall energy savings.
6. Automatic Light Load Detection: Adjusts operation based on load conditions to maintain efficiency across varying load levels.
7. Protection Features: Includes VCC under-voltage lockout and over-voltage protection to enhance reliability and safety.
These features make the IR1161LTRPBF a suitable choice for applications such as adapters, chargers, and other power conversion systems that require efficient and reliable performance.
Pinout
1. VCC: Supply voltage for the IC.
2. GATE: Drives the gate of the synchronous MOSFET.
3. VS: Voltage sensing input, used to detect the voltage across the MOSFET for timing control.
4. CS: Current sensing input for overcurrent protection.
5. GND: Ground reference for the IC.
6. SWS: Synchronization input for the SR controller.
7. CSTH: Threshold setting for the current sense comparator.
8. NC: No connect, usually left open or used for mechanical stability.
The IR1161LTRPBF enhances performance by reducing power losses, improving efficiency, and providing protection features like overcurrent protection, making it suitable for applications like AC-DC converters and adaptors.
Manufacturer
Application
1. Switching Power Supplies: Enhancing efficiency in AC-DC and DC-DC converters.
2. Power Adapters: Improving performance in chargers for laptops, smartphones, and other devices.
3. LED Drivers: Providing efficient power conversion and control for LED lighting systems.
4. Industrial Power Systems: Used in power management for industrial equipment.
5. Consumer Electronics: Contributing to energy-efficient designs in TVs, monitors, and appliances.
Its features such as synchronous rectification and adaptive dead-time control make it ideal for these applications, reducing power loss and improving overall efficiency.