IMP811SEUS/T

Images à titre indicatif uniquement

IMP811SEUS/T

+Nomenclature

  • FabricantDaily Silver imp microélectronique

  • Pièce fabricant #IMP811SEUS/T

  • Fiche technique IMP811SEUS/T DataSheet

  • En stock27347

365 Garantie qualité 24h/24

7*24 Garantie de service 24h/24

90-Garantie après-vente 24h/24

Garantie produit authentique

Spécifications

Attribut Valeur
Manufacturer Daily Silver Imp Microelectronics
Package SOT-143
Reset Active Level Active Low
Output Type Open drain
Threshold Voltage 2.93V
ChipType Voltage monitor
Number of Voltages Monitored 1
Manual Reset Yes
Reset Timeout 140ms
Voltage - Supply 1.1V~5.5V
Operating Temperature -40℃~+125℃@(Tj)

Présentation

Description

The IMP811SEUS/T is a microprocessor supervisory circuit designed to monitor system power supplies and ensure proper operation. Key features include:
- Voltage Monitoring: Tracks VCC (1.8V to 5V) and asserts a reset signal if voltage drops below a preset threshold.
- Manual Reset Input: Allows external reset triggering via a push-button.
- Reset Output: Active-low or active-high (depending on variant) to control system reset.
- Low Power Consumption: Ideal for battery-powered applications.
- Compact Package: Available in SOT-23 or similar small form factors.
Commonly used in embedded systems, industrial controls, and consumer electronics, the IMP811SEUS/T enhances system reliability by preventing erratic behavior during power fluctuations.
For detailed specs, refer to the datasheet.

Features

The IMP811SEUS/T is a microprocessor supervisory circuit with the following key features:
- Voltage Monitoring: Monitors 3V, 3.3V, or 5V systems.
- Manual Reset Input: Allows external reset triggering.
- Reset Output: Active-low (RESET) or active-high (RESET) options.
- Reset Timeout: Fixed 140ms delay after voltage stabilization.
- Low Power Consumption: Typically 5µA in standby.
- Wide Operating Voltage: 1.2V to 5.5V.
- Temperature Range: -40°C to +85°C.
- Package: SOT-23-5.
Ideal for ensuring reliable system operation in embedded applications.

Pinout

The IMP811SEUS/T is a microprocessor supervisory circuit in a SOT-143 package with 4 pins. Its key functions are:
1. Reset Output – Asserts a reset signal when VCC drops below a preset threshold (typically 4.63V for IMP811).
2. Manual Reset Input – Allows an external push-button to trigger a reset.
3. Power Monitoring – Monitors VCC and holds the reset signal until voltage stabilizes.
4. Debounced Reset – Ensures a clean reset pulse (~140ms minimum).
Pins:
- VCC (Pin 1) – Power supply input.
- GND (Pin 2) – Ground.
- RESET (Pin 3) – Active-low reset output.
- MR (Pin 4) – Manual reset input (active-low).
It’s commonly used in embedded systems to ensure proper startup and recovery.

Produits liés à IMP811SEUS/T

  • Devis rapide

  • Envoyez votre demande de devis pour IMP811SEUS/T Utilisez ce formulaire. Nous vous répondrons sous 12 heures.