Images à titre indicatif uniquement
FM24VN10-GTR
+NomenclatureIC FRAM 1MBIT I2C 3.4MHZ 8SOIC
-
FabricantCypress Semiconductor Inc
-
Pièce fabricant #FM24VN10-GTR
-
Package PG-DSO-8
-
En stock4903
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| Package / Case | Tape & Reel (TR) |
| Series | F-RAM™ |
| Part Status | Active |
| Memory Type | Non-Volatile |
| Memory Format | FRAM |
| Technology | FRAM (Ferroelectric RAM) |
| Memory Size | 1Mb (128K x 8) |
| Memory Interface | I²C |
| Clock Frequency | 3.4 MHz |
| Access Time | 130 ns |
| Voltage - Supply | 2V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
Présentation
Description
Key points:
- Interface: 2‑wire I2C serial interface (standard/fast modes) with address pins for bus multiplexing.
- Capacity/organization: about 128 KB of memory accessible as 8‑bit bytes.
- Performance: fast reads; writes are quick and can be done in small page-sized blocks (typical page writes on FRAM are 16 bytes); endurance ≫ traditional EEPROM (virtually unlimited write cycles).
- Power and usage: low power operation with options suitable for microcontroller integration; typically programmable and read/write operations are deterministic with simple timing.
- Features: hardware write protection, data retention over long periods, multiple devices on the same bus.
Note: exact voltage range, timing, temperature, and package options vary by variant. Consult the FM24VN10-GTR datasheet for precise specifications and recommended operating conditions.
Pinout
1 = A2, 2 = A1, 3 = A0, 4 = GND, 5 = SDA, 6 = SCL, 7 = WP, 8 = VCC.
Manufacturer
What kind of company: A Chinese semiconductor company that designs and manufactures memory ICs (serial EEPROM/FRAM-type devices and other memory products).
Application
- Automotive ECUs and body electronics: configuration data, calibration, fault logs
- Industrial control and metering: data logging, parameter storage, diagnostics
- IoT, wearables, and consumer electronics: firmware/config storage, user data
- Medical devices: patient data logging, calibration, audit trails
- Security: storage of keys, certificates, secure IDs
- Smart cards and access control: credential storage and retrieval
- Embedded systems: boot/config data, versioning and metadata