Images à titre indicatif uniquement
FDT458P
+NomenclatureMOSFET P-CH 30V 3.4A SOT223-4
-
FabricantSemi - conducteurs
-
Pièce fabricant #FDT458P
-
Fiche technique FDT458P DataSheet
-
En stock3459
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| Supplier | onsemi |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Series | PowerTrench® |
| Part Status | Active |
| FET Type | P-Channel |
| Technology | MOSFET (Metal Oxide) |
| Drain to Source Voltage (Vdss) | 30 V |
| Current - Continuous Drain(Id) @ 25°C | 3.4A (Ta) |
| Drive Voltage(Max Rds On Min Rds On) | 4.5V, 10V |
| Rds On(Max) @ Id Vgs | 130mOhm @ 3.4A, 10V |
| Vgs(th)(Max) @ Id | 3V @ 250µA |
| Gate Charge(Qg)(Max) @ Vgs | 3.5 nC @ 10 V |
| Vgs(Max) | ±20V |
| Input Capacitance(Ciss)(Max) @ Vds | 205 pF @ 15 V |
| Power Dissipation (Max) | 3W (Ta) |
| Operating Temperature | -55°C ~ 150°C (TJ) |
| Mounting Type | Surface Mount |
| Supplier Device Package | SOT-223-4 |
Présentation
Description
"Introduction to FDT458P" likely refers to a course or module in a specific academic or professional program. Though I don't have specific details about FDT458P, courses with similar codes typically suggest an advanced or specialized subject. The course might cover topics related to food technology, design, or a similar field, given the "FDT" prefix.
Such a course could focus on advanced principles, innovations, and applications within the field, possibly incorporating theoretical and practical components. Topics might include food processing techniques, quality control, safety standards, nutritional analysis, and emerging technologies. Additionally, it could involve hands-on laboratory work, case studies, and industry-relevant projects, providing students with both knowledge and practical skills.
If you are interested in or required to take this course, I recommend checking the syllabus, reaching out to the instructor, or contacting the relevant department at your educational institution for specific details about the course content, objectives, prerequisites, and evaluation methods.
Such a course could focus on advanced principles, innovations, and applications within the field, possibly incorporating theoretical and practical components. Topics might include food processing techniques, quality control, safety standards, nutritional analysis, and emerging technologies. Additionally, it could involve hands-on laboratory work, case studies, and industry-relevant projects, providing students with both knowledge and practical skills.
If you are interested in or required to take this course, I recommend checking the syllabus, reaching out to the instructor, or contacting the relevant department at your educational institution for specific details about the course content, objectives, prerequisites, and evaluation methods.
Equivalent
The FDT458P is a P-channel MOSFET commonly used for switching applications. Equivalent products include:
1. IRF9540N
2. FQP27P06
3. IRF4905
4. STP55PF06
5. SI4435DDY
These alternatives have similar voltage and current ratings, making them suitable substitutes in many applications. Always verify the specific electrical characteristics and package compatibility before substituting to ensure they meet your circuit requirements.
1. IRF9540N
2. FQP27P06
3. IRF4905
4. STP55PF06
5. SI4435DDY
These alternatives have similar voltage and current ratings, making them suitable substitutes in many applications. Always verify the specific electrical characteristics and package compatibility before substituting to ensure they meet your circuit requirements.
Pinout
The FDT458P is a P-channel MOSFET featuring a total of 3 pins. Its primary function is to act as a switch or amplifier in electronic circuits. Here's a brief overview of its pin configuration:
1. Drain (D): This pin is the terminal where the load is connected. It is the output terminal of the MOSFET.
2. Gate (G): The gate pin controls the MOSFET's operation. By applying a voltage to the gate, you can control the current flow between the drain and source.
3. Source (S): This pin is connected to the ground or lower potential side of the circuit.
The FDT458P is widely used in applications requiring efficient power management and switching, thanks to its ability to handle significant current with low on-resistance.
1. Drain (D): This pin is the terminal where the load is connected. It is the output terminal of the MOSFET.
2. Gate (G): The gate pin controls the MOSFET's operation. By applying a voltage to the gate, you can control the current flow between the drain and source.
3. Source (S): This pin is connected to the ground or lower potential side of the circuit.
The FDT458P is widely used in applications requiring efficient power management and switching, thanks to its ability to handle significant current with low on-resistance.
Manufacturer
The FDT458P is manufactured by Fairchild Semiconductor. Fairchild Semiconductor was a company that produced a wide range of semiconductors and electronic components. It played a significant role in the development and growth of Silicon Valley and was known for its innovations in the semiconductor industry. Fairchild Semiconductor specialized in products such as transistors, diodes, and other integrated circuits used in various electronic applications. In 2016, Fairchild Semiconductor was acquired by ON Semiconductor (now known as onsemi), which continues to operate in the semiconductor sector, providing a variety of high-performance solutions for automotive, industrial, cloud, and IoT applications.
Application
The FDT458P is typically used in applications that require precise flow measurement and control. Common areas include:
1. Industrial Processes: Monitoring and controlling fluid flow in manufacturing and processing plants.
2. Water and Wastewater Management: Ensuring accurate measurements for treatment and distribution.
3. Oil and Gas: Measuring crude oil, natural gas, and other hydrocarbons.
4. Chemical Processing: Handling aggressive and corrosive chemicals.
5. HVAC Systems: Maintaining efficient heating, ventilation, and air conditioning operations.
6. Pharmaceuticals: Ensuring precise flow of ingredients in drug manufacturing.
7. Food and Beverage: Maintaining quality and consistency in production processes.
These applications benefit from the reliability and accuracy that the FDT458P offers.
1. Industrial Processes: Monitoring and controlling fluid flow in manufacturing and processing plants.
2. Water and Wastewater Management: Ensuring accurate measurements for treatment and distribution.
3. Oil and Gas: Measuring crude oil, natural gas, and other hydrocarbons.
4. Chemical Processing: Handling aggressive and corrosive chemicals.
5. HVAC Systems: Maintaining efficient heating, ventilation, and air conditioning operations.
6. Pharmaceuticals: Ensuring precise flow of ingredients in drug manufacturing.
7. Food and Beverage: Maintaining quality and consistency in production processes.
These applications benefit from the reliability and accuracy that the FDT458P offers.
Package
The FDT458P typically refers to a semiconductor component, such as a transistor or similar device. However, the specific package type can vary. Common package types for such components include TO-220 or TO-252, among others. For precise information, please refer to the manufacturer's datasheet or product documentation.
