Images à titre indicatif uniquement
EPM570T100C5N
+NomenclatureIC CPLD 440MC 5.4NS 100TQFP
-
FabricantInformations
-
Pièce fabricant #EPM570T100C5N
-
Package TQFP-100
-
En stock7503
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| Package / Case | Tray |
| Series | MAX® II |
| Part Status | Active |
| Programmable Type | In System Programmable |
| Delay Timetpd(1)Max | 5.4 ns |
| Voltage Supply - Internal | 2.5V, 3.3V |
| Number of Logic Elements/Blocks | 570 |
| Number of Macrocells | 440 |
| Number of I/O | 76 |
| Operating Temperature | 0°C ~ 85°C (TJ) |
| Mounting Type | Surface Mount |
Présentation
Description
Key features:
- Non-volatile, instant-on configuration
- User flash memory (8,192 bits)
- Low power consumption
- Supports high-speed I/O (up to 304 MHz)
- JTAG and in-system programmability
Applications include glue logic, interface bridging, and system control. Its small form factor and low cost make it ideal for embedded designs.
For more details, refer to the Intel MAX II datasheet.
Equivalent
- Lattice LCMXO2-1200HC-6TG100C (MachXO2 series)
- Xilinx XC2C256-7TQG100C (CoolRunner-II series)
- Microchip ATF1508ASV-15AU100 (ATF15xx series)
These alternatives offer similar logic density, I/O count, and package compatibility (TQFP-100). Check power, speed, and feature requirements for exact suitability.
Features
- 570 logic elements (LEs)
- 8,192 bits of user flash memory
- 100-pin TQFP package
- 5ns pin-to-pin logic delay
- 3.3V/2.5V operation with 1.8V I/O support
- 116 user I/O pins
- In-system programmability (ISP) via JTAG
- Non-volatile, instant-on operation
- Low power consumption (typical standby current: 25µA)
- Supports multiple I/O standards (LVTTL, LVCMOS, PCI)
Ideal for glue logic, interface bridging, and power-up control in cost-sensitive designs.
Pinout
- Pin Count: 100-pin (TQFP package)
- Function:
- 570 macrocells (logic capacity)
- 3.3V operation
- User I/O Pins: 76 (general-purpose)
- On-chip flash memory for configuration
- JTAG interface for programming
- Supports LVTTL, LVCMOS, PCI, and LVDS I/O standards
- Features in-system programmability (ISP)
It is commonly used for glue logic, interface bridging, and control applications.
Manufacturer
Intel acquired Altera in 2015, integrating it into its Programmable Solutions Group (PSG). Altera was a leading FPGA and CPLD manufacturer, known for high-performance programmable logic devices.
Intel continues producing Altera’s legacy products, including the MAX II series, which targets low-power, cost-sensitive applications. The EPM570T100C5N is a mid-range CPLD with 570 macrocells, commonly used in industrial, automotive, and consumer electronics.
Intel is a global semiconductor leader, focusing on CPUs, GPUs, and programmable logic solutions.
Application
- Embedded Systems: For glue logic, interfacing, and control.
- Industrial Automation: Signal processing, I/O expansion, and timing control.
- Communications: Protocol bridging (e.g., UART, SPI, I2C).
- Consumer Electronics: Display control and power management.
- Automotive: Sensor interfacing and diagnostics.
- Medical Devices: Low-latency signal conditioning.
Its low power, high speed, and reprogrammability make it ideal for cost-sensitive, space-constrained applications.
