DS90CF388VJD

Images à titre indicatif uniquement

DS90CF388VJD

+Nomenclature

LINE RECEIVER, 8 FUNC, 8 RCVR, P

  • FabricantSemi - conducteurs nationaux

  • Pièce fabricant #DS90CF388VJD

  • En stock5608

365 Garantie qualité 24h/24

7*24 Garantie de service 24h/24

90-Garantie après-vente 24h/24

Garantie produit authentique

Spécifications

Attribut Valeur
Supplier Rochester Electronics, LLC
Package Bulk
ProductStatus Active

Présentation

Description

DS90CF388VJD is a Texas Instruments 4-channel FPD-Link II deserializer. It takes a high‑speed serial video stream from a camera-side serializer (e.g., DS90CF389) over a single FPD-Link II link and converts it into four parallel video outputs for an ECU or image processor.
Key points:
- 4 independent deserialized video channels
- Receiver for automotive camera links and frame/line synchronization
- SPI/I2C-compatible control interface for configuration and status
- Designed for automotive applications (e.g., rear‑view, surround‑view, ADAS)
- Pairing with the corresponding serializer enables long-reach, low‑wiring automotive camera networks
Usage scenario: integrate with TI’s camera link pair (serializer on the camera, deserializer in the vehicle ECU) to reduce wiring and simplify data handling while meeting automotive reliability and temperature requirements. For exact electrical specs and packaging details, consult the DS90CF388 datasheet.

Features

DS90CF388VJD is TI’s high‑speed deserializer for automotive camera links (FPD‑Link). Key features:
- Deserializes a high‑speed serial video stream into parallel data for the host
- Clock/data recovery via on‑chip PLL; supports gigabit‑rate serial input
- Configurable parallel data width/format (e.g., 8/12/16‑bit families) to match host interface
- LVDS/low‑voltage differential signaling I/O; 3.3V I/O domain
- I2C‑compatible control interface for mode, ID, and register settings
- Auto‑alignment, data path control, and power‑down/low‑power modes
- Automotive temperature range (-40°C to +125°C) with protection features
- 28‑pin package (VJD variant) suitable for automotive PCB layouts
Typically used with DS90CF387 serializer in camera‑link applications for automotive cameras and ADAS systems.

Pinout

- Pin count: 28 pins.
- Function: High‑speed video serializer/deserializer for automotive camera interfaces (FPD‑Link/ LVDS); converts between parallel video data and LVDS serial streams (and vice versa).

Manufacturer

- Manufacturer: Texas Instruments (TI).
- What kind of company: An American multinational semiconductor company that designs and manufactures analog and embedded processing integrated circuits and other semiconductor products.

Application

DS90CF388VJD is a high‑speed image-data link device used to transport video from sensors to a host processor. Typical application areas include:
- Automotive imaging: ADAS, surround-view, rear/backup cameras using FPD-Link interfaces
- Industrial/machine-vision systems: robotics, inspection, barcode/quality control
- Security and surveillance cameras with long/EMI‑reduced links
- Medical imaging equipment needing remote sensor data
- Robotics, UAVs, and other embedded cameras requiring robust high-speed video links
Note: Applies to automotive/industrial imaging where a camera sensor data stream must be transmitted over a cable to processing electronics.

Package

DS90CF388VJD is available in a 16-pin TSSOP package.