Images à titre indicatif uniquement
DS1233-10
+NomenclatureIC SUPERVISOR 1 CHANNEL TO92-3
-
FabricantAnalog Equipment GmbH / intégration Maxim
-
Pièce fabricant #DS1233-10
-
En stock5631
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| Series | EconoReset |
| Part Status | Obsolete |
| Base Product Number | DS1233 |
| DigiKey Programmable | Not Verified |
| Type | Simple Reset/Power-On Reset |
| Voltage - Threshold | 4.375V |
| Output | Open Drain or Open Collector |
| Reset | Active Low |
| Reset Timeout | 250ms Minimum |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Through Hole |
| Package | TO-226-3, TO-92-3 (TO-226AA) |
| Supplier Device Package | TO-92-3 |
| Packaging | Bulk |
| Number of Voltages Monitored | 1 |
Présentation
Description
"DS1233-10" refers to a series of microprocessor supervisory circuits designed by Dallas Semiconductor/Maxim Integrated (now part of Analog Devices). These devices are primarily used to monitor power supply status in embedded systems and microprocessor-based applications. The key function of the DS1233-10 is to ensure the microprocessor is reset when the power supply voltage drops below a specified threshold, thereby preventing erratic system behavior.
Key features of the DS1233-10 include:
1. Voltage Monitoring: It monitors the power supply voltage and triggers a reset when the voltage falls below a predetermined level.
2. Active Low Reset Output: The device asserts a reset signal when the voltage is inadequate, which remains active until the voltage stabilizes and meets the required threshold.
3. Push-button Reset: It often includes a manual reset input, allowing for an external reset signal to be initiated.
4. Precision Voltage Reference: Ensures accurate voltage monitoring and reliable system resets.
These features make the DS1233-10 suitable for applications requiring precise power management and reliability, such as consumer electronics, industrial controllers, and communication devices.
Key features of the DS1233-10 include:
1. Voltage Monitoring: It monitors the power supply voltage and triggers a reset when the voltage falls below a predetermined level.
2. Active Low Reset Output: The device asserts a reset signal when the voltage is inadequate, which remains active until the voltage stabilizes and meets the required threshold.
3. Push-button Reset: It often includes a manual reset input, allowing for an external reset signal to be initiated.
4. Precision Voltage Reference: Ensures accurate voltage monitoring and reliable system resets.
These features make the DS1233-10 suitable for applications requiring precise power management and reliability, such as consumer electronics, industrial controllers, and communication devices.
Equivalent
The DS1233-10 is a microprocessor supervisory circuit that provides a reset signal for microprocessors during power-up, power-down, and brownout conditions. Equivalent products can include:
1. MAX1232 from Maxim Integrated
2. MCP130-450 from Microchip Technology
3. STM1001 from STMicroelectronics
4. TL7705 from Texas Instruments
These alternatives offer similar functionality, such as monitoring and reset capabilities for microprocessor systems. Always verify pin compatibility and electrical characteristics before replacement.
1. MAX1232 from Maxim Integrated
2. MCP130-450 from Microchip Technology
3. STM1001 from STMicroelectronics
4. TL7705 from Texas Instruments
These alternatives offer similar functionality, such as monitoring and reset capabilities for microprocessor systems. Always verify pin compatibility and electrical characteristics before replacement.
Pinout
The DS1233-10 is a micro-monitor chip designed to monitor the power supply to a microprocessor system. It ensures that the system remains in a reset state during power-up, power-down, and brownout conditions. The DS1233-10 has a 3-pin configuration, and each pin serves the following functions:
1. Pin 1 (GND): This is the ground pin and should be connected to the system ground.
2. Pin 2 (RST): This is the reset output pin. The DS1233-10 holds this pin low whenever the monitored voltage (VCC) is below the specified threshold (4.37V ± 5%). Once the voltage exceeds the threshold, the pin is held low for a minimum of 350 ms after VCC becomes valid.
3. Pin 3 (VCC): This is the supply voltage pin. It monitors the power supply to the microprocessor. If VCC drops below the threshold, the chip asserts the reset signal.
The DS1233-10 helps ensure reliable operation of microprocessor-based systems by providing necessary reset control in response to power supply variations.
1. Pin 1 (GND): This is the ground pin and should be connected to the system ground.
2. Pin 2 (RST): This is the reset output pin. The DS1233-10 holds this pin low whenever the monitored voltage (VCC) is below the specified threshold (4.37V ± 5%). Once the voltage exceeds the threshold, the pin is held low for a minimum of 350 ms after VCC becomes valid.
3. Pin 3 (VCC): This is the supply voltage pin. It monitors the power supply to the microprocessor. If VCC drops below the threshold, the chip asserts the reset signal.
The DS1233-10 helps ensure reliable operation of microprocessor-based systems by providing necessary reset control in response to power supply variations.
Manufacturer
The DS1233-10 is manufactured by Dallas Semiconductor, which is now part of Maxim Integrated. Maxim Integrated is a company that designs, manufactures, and sells analog and mixed-signal integrated circuits. These products are used in a wide range of industries, including consumer electronics, automotive, industrial, communications, and computing. In 2021, Maxim Integrated was acquired by Analog Devices, Inc., expanding its portfolio and market reach.
Application
The DS1233-10 is a microprocessor supervisory circuit primarily used for monitoring power supply levels in electronic systems. Its key application areas include:
1. Embedded Systems: Ensures reliable operation by monitoring voltage levels and initiating reset sequences during power-up, power-down, or brownout conditions.
2. Consumer Electronics: Used in devices to prevent data corruption by resetting the microprocessor when the power supply falls below a certain threshold.
3. Industrial Control Systems: Provides a safeguard against unexpected shutdowns and ensures stability in industrial applications.
4. Telecommunications: Helps maintain system integrity by monitoring power supplies in communication equipment.
These applications leverage the DS1233-10 for its ability to enhance reliability and protect against voltage irregularities.
1. Embedded Systems: Ensures reliable operation by monitoring voltage levels and initiating reset sequences during power-up, power-down, or brownout conditions.
2. Consumer Electronics: Used in devices to prevent data corruption by resetting the microprocessor when the power supply falls below a certain threshold.
3. Industrial Control Systems: Provides a safeguard against unexpected shutdowns and ensures stability in industrial applications.
4. Telecommunications: Helps maintain system integrity by monitoring power supplies in communication equipment.
These applications leverage the DS1233-10 for its ability to enhance reliability and protect against voltage irregularities.
Package
The DS1233-10 is typically available in a TO-92 package. This package type is commonly used for small, three-lead electronic components like sensors and voltage monitors.
