Images à titre indicatif uniquement
BLM18EG601SN1D
+NomenclatureFERRITE BEAD 600 OHM 0603 1LN
-
FabricantMurata ÉLECTRONIQUE
-
Pièce fabricant #BLM18EG601SN1D
-
Fiche technique BLM18EG601SN1D DataSheet
-
En stock27165
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| Series | EMIFIL®, BLM18 |
| PartStatus | Active |
| NumberofLines | 1 |
| Impedance@Frequency | 600 Ohms @ 100 MHz |
| CurrentRating(Max) | 500mA |
| DCResistance(DCR)(Max) | 350mOhm |
| OperatingTemperature | -55°C ~ 125°C |
| Package/Case | 0603 (1608 Metric) |
| MountingType | Surface Mount |
| Height(Max) | 0.037" (0.95mm) |
| Size/Dimension | 0.063" L x 0.032" W (1.60mm x 0.80mm) |
| BaseProductNumber | BLM18EG |
Présentation
Description
The BLM18EG601SN1D is a chip EMIFIL, a type of electromagnetic interference (EMI) suppression filter manufactured by Murata. This component is part of the BLM series, known for its effective noise suppression capabilities. It is a ferrite bead designed to suppress high-frequency noise in electronic circuits, ensuring signal integrity and reducing electromagnetic interference.
Key specifications include:
- Impedance: 600 ohms at 100 MHz.
- Rated Current: 1 amp.
- DC Resistance: 0.20 ohms maximum.
- Operating Temperature Range: -55°C to +125°C.
The component is designed for surface mount technology (SMT) and typically used in applications where space is limited, such as mobile devices, computers, and other electronic equipment. The BLM18EG601SN1D is particularly well-suited for power line applications and signal line noise suppression, helping to ensure that devices meet various EMI compliance standards. Its compact size and reliability make it a popular choice for electronic design engineers looking to mitigate EMI issues effectively.
Key specifications include:
- Impedance: 600 ohms at 100 MHz.
- Rated Current: 1 amp.
- DC Resistance: 0.20 ohms maximum.
- Operating Temperature Range: -55°C to +125°C.
The component is designed for surface mount technology (SMT) and typically used in applications where space is limited, such as mobile devices, computers, and other electronic equipment. The BLM18EG601SN1D is particularly well-suited for power line applications and signal line noise suppression, helping to ensure that devices meet various EMI compliance standards. Its compact size and reliability make it a popular choice for electronic design engineers looking to mitigate EMI issues effectively.
Equivalent
The BLM18EG601SN1D is a ferrite bead manufactured by Murata. Equivalent products can include:
1. TDK MPZ1608S601A
2. Laird LFB1608FS601T
3. Taiyo Yuden BK1608HS601-T
4. Wurth Elektronik WE-CBF 742792211
Ensure compatibility in terms of impedance, current rating, and size when selecting an equivalent.
1. TDK MPZ1608S601A
2. Laird LFB1608FS601T
3. Taiyo Yuden BK1608HS601-T
4. Wurth Elektronik WE-CBF 742792211
Ensure compatibility in terms of impedance, current rating, and size when selecting an equivalent.
Features
The BLM18EG601SN1D is a surface-mount ferrite bead from Murata designed for EMI suppression in electronic circuits. Here are its key features:
1. Impedance: It has an impedance of 600 Ohms at a frequency of 100 MHz, making it effective in attenuating high-frequency noise.
2. Current Rating: The component can handle a maximum current of 200 mA, suitable for various low-power applications.
3. Size: It comes in the compact 0603 package size, which measures approximately 1.6 mm x 0.8 mm, ideal for space-constrained designs.
4. DC Resistance: The bead has a low DC resistance of 0.60 Ohms, ensuring minimal impact on the circuit's power efficiency.
5. Operating Temperature Range: It can operate within a temperature range of -55°C to +125°C, allowing for use in diverse environmental conditions.
6. Applications: Commonly used in mobile devices, consumer electronics, and communication equipment to reduce electromagnetic interference and improve signal integrity.
These features make the BLM18EG601SN1D a versatile choice for noise suppression in electronic circuits.
1. Impedance: It has an impedance of 600 Ohms at a frequency of 100 MHz, making it effective in attenuating high-frequency noise.
2. Current Rating: The component can handle a maximum current of 200 mA, suitable for various low-power applications.
3. Size: It comes in the compact 0603 package size, which measures approximately 1.6 mm x 0.8 mm, ideal for space-constrained designs.
4. DC Resistance: The bead has a low DC resistance of 0.60 Ohms, ensuring minimal impact on the circuit's power efficiency.
5. Operating Temperature Range: It can operate within a temperature range of -55°C to +125°C, allowing for use in diverse environmental conditions.
6. Applications: Commonly used in mobile devices, consumer electronics, and communication equipment to reduce electromagnetic interference and improve signal integrity.
These features make the BLM18EG601SN1D a versatile choice for noise suppression in electronic circuits.
Pinout
The BLM18EG601SN1D is a ferrite bead manufactured by Murata. It is used for electromagnetic interference (EMI) suppression in electronic circuits. This component is part of Murata's BLM series, designed to provide noise filtering.
The BLM18EG601SN1D specifically has a 0603 (1608 metric) package size, which typically refers to a two-terminal component in surface-mount technology (SMT). Therefore, it has a pin count of 2.
Its primary function is to suppress high-frequency noise, while allowing DC and lower-frequency signals to pass through. This is particularly useful in minimizing unwanted interference in power lines and signal lines within electronic devices.
The BLM18EG601SN1D specifically has a 0603 (1608 metric) package size, which typically refers to a two-terminal component in surface-mount technology (SMT). Therefore, it has a pin count of 2.
Its primary function is to suppress high-frequency noise, while allowing DC and lower-frequency signals to pass through. This is particularly useful in minimizing unwanted interference in power lines and signal lines within electronic devices.
Manufacturer
The BLM18EG601SN1D is manufactured by Murata Manufacturing Co., Ltd. Murata is a Japanese company that specializes in the production of electronic components, modules, and devices. Founded in 1944, Murata has become a leading provider of passive electronic components like capacitors, inductors, and filters, as well as power supply modules, sensors, and wireless communication modules.
The company excels in creating innovative solutions for a variety of applications, including consumer electronics, automotive, healthcare, and industrial systems. As a global leader in the electronics industry, Murata emphasizes research and development to maintain its competitive edge and to meet the evolving needs of its customers. The company operates globally, with manufacturing facilities and sales offices spread across Asia, Europe, and the Americas.
The company excels in creating innovative solutions for a variety of applications, including consumer electronics, automotive, healthcare, and industrial systems. As a global leader in the electronics industry, Murata emphasizes research and development to maintain its competitive edge and to meet the evolving needs of its customers. The company operates globally, with manufacturing facilities and sales offices spread across Asia, Europe, and the Americas.
Application
The BLM18EG601SN1D is a chip bead ferrite designed for EMI (electromagnetic interference) suppression in electronic circuits. Its primary application areas include:
1. Consumer Electronics: Used in smartphones, tablets, and laptops to minimize noise and interference.
2. Automotive Electronics: Helps in reducing electromagnetic interference in automotive control systems and infotainment.
3. Industrial Electronics: Applied in industrial control systems to ensure stable and interference-free operation.
4. Communication Devices: Employed in routers, modems, and other networking equipment for signal integrity.
Overall, it is used to enhance signal quality and reliability by suppressing high-frequency noise in various electronic devices and systems.
1. Consumer Electronics: Used in smartphones, tablets, and laptops to minimize noise and interference.
2. Automotive Electronics: Helps in reducing electromagnetic interference in automotive control systems and infotainment.
3. Industrial Electronics: Applied in industrial control systems to ensure stable and interference-free operation.
4. Communication Devices: Employed in routers, modems, and other networking equipment for signal integrity.
Overall, it is used to enhance signal quality and reliability by suppressing high-frequency noise in various electronic devices and systems.
Package
The BLM18EG601SN1D is a chip ferrite bead from Murata, designed for EMI suppression. It comes in an 0603 (1608 metric) surface-mount package, suitable for high-density circuit boards.
