Images à titre indicatif uniquement
AM26C32IPWR
+NomenclatureIC RECEIVER 0/4 16TSSOP
-
FabricantTexas Instruments
-
Pièce fabricant #AM26C32IPWR
-
Package TSSOP16
-
En stock5995
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| ProductStatus | Active |
| Type | Receiver |
| Protocol | RS422, RS423 |
| NumberofDrivers/Receivers | 0/4 |
| ReceiverHysteresis | 60 mV |
| Voltage-Supply | 4.5V ~ 5.5V |
| OperatingTemperature | -40°C ~ 85°C |
| MountingType | Surface Mount |
| Package/Case | 16-TSSOP (0.173, 4.40mm Width) |
Présentation
Description
The AM26C32IPWR is a quad differential line receiver from Texas Instruments, designed for digital data communication systems. It is specifically crafted to interface with balanced and unbalanced digital data transmission equipment. The device conforms to the RS-422 and RS-423 standards and is ideal for applications requiring high-speed and long-distance data transmission.
Key features of the AM26C32IPWR include a wide supply voltage range, low power consumption, and high input sensitivity, allowing it to effectively operate in noisy environments. It supports a common-mode voltage range, making it versatile for various communication systems. The device has a fail-safe design, ensuring that the outputs remain in a known state when the inputs are open or shorted.
Packaged in a TSSOP (Thin Shrink Small Outline Package), the AM26C32IPWR is compact, facilitating space-saving designs in electronic systems. Its reliability and compliance with industry standards make it suitable for use in industrial, commercial, and consumer electronics applications.
Key features of the AM26C32IPWR include a wide supply voltage range, low power consumption, and high input sensitivity, allowing it to effectively operate in noisy environments. It supports a common-mode voltage range, making it versatile for various communication systems. The device has a fail-safe design, ensuring that the outputs remain in a known state when the inputs are open or shorted.
Packaged in a TSSOP (Thin Shrink Small Outline Package), the AM26C32IPWR is compact, facilitating space-saving designs in electronic systems. Its reliability and compliance with industry standards make it suitable for use in industrial, commercial, and consumer electronics applications.
Equivalent
The AM26C32IPWR is a quadruple differential line receiver. Equivalent products include:
1. SN75176B series by Texas Instruments
2. MAX1487 series by Maxim Integrated
3. DS8921 series by Texas Instruments
4. LTC489 series by Analog Devices
5. ADM483 series by Analog Devices
These alternatives offer similar functionality and can be used as replacements in applications requiring differential line receivers. Be sure to check the datasheets for compatibility with your specific requirements.
1. SN75176B series by Texas Instruments
2. MAX1487 series by Maxim Integrated
3. DS8921 series by Texas Instruments
4. LTC489 series by Analog Devices
5. ADM483 series by Analog Devices
These alternatives offer similar functionality and can be used as replacements in applications requiring differential line receivers. Be sure to check the datasheets for compatibility with your specific requirements.
Features
The AM26C32IPWR is a quad differential line receiver known for its high-speed and low-power consumption. It is designed to meet the requirements of the TIA/EIA-422-B and ITU V.11 standards, making it suitable for balanced data transmission. Key features include:
1. Quad Configurations: Contains four independent receivers in a single package, saving space and simplifying design.
2. Wide Supply Voltage Range: Operates from 4.5V to 5.5V, allowing for flexible integration into various systems.
3. High Input Impedance: Offers high input impedance, which minimizes the load on the line.
4. Low Power Consumption: Consumes minimal power, making it ideal for battery-operated devices.
5. Built-in Fail-Safe: Provides a default high output when inputs are open, shorted, or terminated, ensuring reliable operation.
6. Short-Circuit Protection: Protects outputs against short circuits, enhancing durability.
7. Temperature Range: Rated for industrial temperature range of -40°C to 85°C, suitable for harsh environments.
8. Fast Switching Speeds: Supports high-speed data transfer rates with quick response times.
These features make the AM26C32IPWR well-suited for applications requiring reliable data communication over long distances.
1. Quad Configurations: Contains four independent receivers in a single package, saving space and simplifying design.
2. Wide Supply Voltage Range: Operates from 4.5V to 5.5V, allowing for flexible integration into various systems.
3. High Input Impedance: Offers high input impedance, which minimizes the load on the line.
4. Low Power Consumption: Consumes minimal power, making it ideal for battery-operated devices.
5. Built-in Fail-Safe: Provides a default high output when inputs are open, shorted, or terminated, ensuring reliable operation.
6. Short-Circuit Protection: Protects outputs against short circuits, enhancing durability.
7. Temperature Range: Rated for industrial temperature range of -40°C to 85°C, suitable for harsh environments.
8. Fast Switching Speeds: Supports high-speed data transfer rates with quick response times.
These features make the AM26C32IPWR well-suited for applications requiring reliable data communication over long distances.
Pinout
The AM26C32IPWR is a quad differential line receiver integrated circuit, designed to receive differential signals in digital communication systems. It is typically used in RS-422 and RS-485 applications.
The device comes in a 16-pin package. Here’s a brief outline of its pin functions:
1. VCC (Pin 16): Power supply pin.
2. GND (Pin 8): Ground pin.
3. A, B, C, D (Pins 2, 6, 11, 15): Inverting inputs for each of the four receivers.
4. A\', B\', C\', D\' (Pins 1, 7, 10, 14): Non-inverting inputs for each of the four receivers.
5. Y, Z, W, X (Pins 3, 5, 12, 9): Output pins corresponding to each receiver.
6. ENABLE (Pin 4): Control pin to enable or disable the outputs.
The AM26C32IPWR offers high-speed response, low power consumption, and enhanced noise immunity, making it suitable for robust data communication environments.
The device comes in a 16-pin package. Here’s a brief outline of its pin functions:
1. VCC (Pin 16): Power supply pin.
2. GND (Pin 8): Ground pin.
3. A, B, C, D (Pins 2, 6, 11, 15): Inverting inputs for each of the four receivers.
4. A\', B\', C\', D\' (Pins 1, 7, 10, 14): Non-inverting inputs for each of the four receivers.
5. Y, Z, W, X (Pins 3, 5, 12, 9): Output pins corresponding to each receiver.
6. ENABLE (Pin 4): Control pin to enable or disable the outputs.
The AM26C32IPWR offers high-speed response, low power consumption, and enhanced noise immunity, making it suitable for robust data communication environments.
Manufacturer
The AM26C32IPWR is manufactured by Texas Instruments (TI). Texas Instruments is an American technology company that designs and manufactures semiconductors and various integrated circuits, which are used in electronics worldwide. TI is renowned for its innovations in analog technology, embedded processing, and digital light processing (DLP) technologies. The company serves a diverse range of industries, including automotive, industrial, personal electronics, communications equipment, and enterprise systems.
Application
The AM26C32IPWR is a quad differential line receiver commonly used in applications requiring high-speed data transmission. Its typical applications include:
1. Data Communication: Used for receiving high-speed data over twisted pair or coaxial cables in RS-422 and RS-485 communication standards.
2. Industrial Automation: Facilitates reliable data transmission in noisy environments, ideal for industrial control systems.
3. Computer Peripherals: Interfaces for connecting peripherals that require differential signal reception.
4. Telecommunications: Used in systems requiring robust signal integrity over long distances.
5. Instrumentation: Essential in data acquisition and remote sensing applications where signal integrity is crucial.
These receivers offer features like high input impedance and low power consumption, making them versatile in various digital communication scenarios.
1. Data Communication: Used for receiving high-speed data over twisted pair or coaxial cables in RS-422 and RS-485 communication standards.
2. Industrial Automation: Facilitates reliable data transmission in noisy environments, ideal for industrial control systems.
3. Computer Peripherals: Interfaces for connecting peripherals that require differential signal reception.
4. Telecommunications: Used in systems requiring robust signal integrity over long distances.
5. Instrumentation: Essential in data acquisition and remote sensing applications where signal integrity is crucial.
These receivers offer features like high input impedance and low power consumption, making them versatile in various digital communication scenarios.
Package
The AM26C32IPWR is a differential line receiver IC, and it comes in a TSSOP (Thin Shrink Small Outline Package) package type. Specifically, it is in a 16-pin TSSOP form factor, which is compact and suitable for surface-mount applications.
