ADUM5000WARWZ

ADuM5000WARWZ is Analog Devices’ ISOPOWER-enabled digital isolator (iCoupler). It provides four isolated data channels across a galvanic barrier and includes an integrated isolated power supply for powering the isolated side, enabling a self-contained isolated interface without an external isolated supply. It uses iCoupler technology for fast, low-latency data transfer with good common‑mode immunity, suitable for industrial, motor-control, and power-conversion applications. The WARWZ suffix denotes a specific package/tape-and-reel option with RoHS compliance and a defined temperature range. Typical uses include isolated PWM/logic interfaces, motor drives, and PLC/industrial control signaling. Benefits: reduced bill of materials, simpler layout, and improved reliability due to integrated iso-power and isolation.

Direct equivalents: other ADuM5000 variants (e.g., ADuM5000ARWZ/ADuM5000BRWZ). Functional/near equivalents: other Analog Devices isoPower isolators (ADuM5010/ADuM5011 and ADuM5020 family). Third‑party alternatives: Silicon Labs Si86xx series (isolated digital isolators) or combining a digital isolator with an isolated DC‑DC module (Murata/TDK). Check datasheets for pinout, isolation rating and integrated DC‑DC equivalence before substituting.

ADuM5000WARWZ is a 4-channel isoPower digital isolator with an integrated isolated power supply. Key features:
- 5 kV RMS isolation between primary and secondary sides
- Four independent data channels with isolation
- Integrated IsoPower power solution to drive the isolated side (no external DC-DC needed)
- High-speed data rates (up to tens of Mbps; typical around 25 Mbps)
- Very low propagation delay (typical in the single-digit to low double-digit ns)
- High common-mode transient immunity (CMTI) suitable for industrial environments (tens of kV/µs)
- Wide operating temperature range (-40 to +125 °C)
- RoHS-compliant, packaged in a 16-lead wide-body SOIC (and available in Tape & Reel)
- Applications: isolated SPI/SCI interfaces, motor control, power electronics, and other systems requiring galvanic isolation with power on the isolated side
Note: exact current capability of the isolated power and some packaging options may vary by device revision and package.

ADUM5000WARWZ is an 8‑pin device. It is a dual‑channel iCoupler digital isolator with an integrated isolated DC‑to‑DC converter (provides isolated VOUT on the secondary side). In short: it isolates two digital signal channels between primary and secondary domains while also supplying isolated power to the secondary side. Typical pins include VCC1 and GND1 (primary power), two input/output data pins on the primary side and two corresponding isolated data pins on the secondary side, plus VISO (isolated VOUT) and GND2 (secondary ground).

The ADUM5000WARWZ is manufactured by Analog Devices, Inc. Analog Devices is a U.S.-based multinational semiconductor company that designs and manufactures high-performance analog, mixed-signal, and digital signal-processing integrated circuits and system solutions (including data converters, amplifiers, power-management, isolation devices like the ADuM series, sensors and RF components) for industrial, communications, automotive, healthcare and consumer markets.

ADuM5000WARWZ is a three-channel digital isolator with an integrated IsoPower isolated supply. Typical applications include:
- Galvanic isolation for microcontroller interfaces (SPI, I2C, UART) from high‑voltage/noisy domains
- Isolated power for remote sensors and transducers
- Motor control and drive electronics
- Industrial automation and PLC I/O
- Energy metering, power electronics, and battery‑management systems
- Automotive/EV instrumentation
- Medical equipment requiring patient safety isolation
- Rugged data links in harsh environments

The ADUM5000WARWZ is supplied in a 16-lead wide-body SOIC (SOIC_W) surface-mount package; the "WZ" denotes RoHS-compliant, tape-and-reel packaging.