Images à titre indicatif uniquement
AD8348ARUZ
+NomenclatureRF DEMOD IC 50MHZ-1GHZ 28TSSOP
-
FabricantAnalog Equipment GmbH.
-
Pièce fabricant #AD8348ARUZ
-
Fiche technique AD8348ARUZ DataSheet
-
En stock6208
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| PartStatus | Active |
| Function | Demodulator |
| LOFrequency | 100MHz ~ 2GHz |
| RFFrequency | 50MHz ~ 1GHz |
| P1dB | -22dBm |
| Gain | 25.5dB |
| NoiseFigure | 10.75dB |
| Current-Supply | 58 mA |
| Voltage-Supply | 2.7V ~ 5.5V |
| MountingType | Surface Mount |
| Package/Case | 28-TSSOP (0.173", 4.40mm Width) |
| SupplierDevicePackage | 28-TSSOP |
| BaseProductNumber | AD8348 |
Présentation
Description
Key features of the AD8348ARUZ include high linearity, low noise figure, and a wide dynamic range, which enhance signal quality and robustness in challenging environments. The device incorporates an on-chip quadrature phase splitter, differential amplifiers, and a pair of Gilbert cell mixers, ensuring efficient conversion of RF signals to baseband or low intermediate frequencies.
The AD8348ARUZ is housed in a compact 16-lead TSSOP package, facilitating integration into dense circuit designs. It operates with a single power supply, simplifying power management in complex systems. Its ease of use, combined with its performance characteristics, makes it a popular choice for engineers designing advanced RF communication systems.
Equivalent
Features
1. Frequency Range: It supports a wide RF input frequency range from 800 MHz to 2.7 GHz, catering to various wireless communication needs.
2. Conversion Gain: The device offers a conversion gain of approximately 12 dB, enhancing signal strength for further processing.
3. Noise Figure: It has a low noise figure of around 10.3 dB, ensuring minimal additional noise is introduced during demodulation.
4. Quadrature Demodulation: The chip provides I/Q demodulation with precise phase and amplitude balance, critical for accurate signal processing in complex modulation schemes.
5. Supply Voltage: Operates on a single 5 V supply, simplifying power management in system designs.
6. Operating Temperature Range: Functions reliably over a temperature range of -40°C to +85°C, suitable for various environmental conditions.
7. Package Type: Available in a 16-lead TSSOP package, which is compact and suitable for space-constrained applications.
These features make the AD8348ARUZ ideal for use in communication systems, including cellular base stations, point-to-point radios, and other RF applications.
Pinout
1. RF IN: Input for the RF signal.
2. MIX OUT: Mixer output.
3. LO IN: Local oscillator input.
4. BIAS: Bias setting pin for internal operations.
5. VGA IN: Input for the variable gain amplifier.
6. VGA OUT: Output for the variable gain amplifier.
7. I OUT: In-phase output signal.
8. Q OUT: Quadrature output signal.
9. VPS1, VPS2: Power supply pins.
10. COM1, COM2: Common pins for ground connection.
11. ENBL: Enable pin for activating the IC.
12. GAIN: Gain control pin.
13. DET O/P: Detector output, often used for AGC.
14. TEMP: Temperature output or monitor pin.
The AD8348ARUZ is used for converting RF signals to baseband I/Q signals and is suitable for applications such as wireless communications, radar, and instrumentation.
Manufacturer
Application
1. Cellular Base Stations: For demodulating RF signals in GSM, CDMA, and other standards.
2. Point-to-Point Radio Links: Enabling efficient signal processing in microwave and millimeter-wave communication.
3. Wireless LANs: Supporting high-frequency signal demodulation in Wi-Fi networks.
4. Instrumentation: Used in test and measurement equipment for RF signal analysis.
5. Radar: Assists in demodulating radar signals for defense and commercial applications.
6. Software-Defined Radios: Facilitates flexible RF front-end processing.
These applications leverage its capabilities of high linearity and integration in RF and IF signal processing.