74LVC07ABQ,115

74LVC07ABQ,115 is a 6-channel hex buffer/driver with open-drain outputs in the LVC logic family (non-inverting). It buffers digital signals and allows wired-AND/bus sharing since the outputs only sink current and require external pull‑ups to define the high level. This makes it useful for level shifting between different logic voltages (e.g., 3.3 V to 5 V) and for buffering multiple devices on a shared bus.
Key points:
- 6 non-inverting buffers with open-drain outputs
- Vcc typically 1.65–3.6 V (low-voltage CMOS)
- Outputs require pull-up resistors
- Open-drain enables wired-OR configurations and safe bus interfacing
ABQ is a RoHS-compliant package/variant code; 115 likely a packaging/date/lot code. The exact package (e.g., 14-pin SOIC/TSSOP) should be confirmed on the specific datasheet for the exact part variant.

Equivalent devices (same function: hex buffer/driver with 3‑state outputs in the LVC family):
- NXP: 74LVC07DW, 74LVC07D
- STMicroelectronics: 74LVC07D
- Renesas: μPD74LVC07
- Onsemi: NC7LVC07G
Note: check packaging and supply voltage to ensure exact match.

Here are the key features of TI SN74LVC07ABQ (6-channel hex buffer with open-drain outputs):
- Hex buffer: six non-inverting buffers with open-drain outputs
- Supply voltage: Vcc = 1.65 V to 3.6 V
- Input voltage range: 0 to Vcc
- Open-drain outputs require external pull-ups; supports wired-OR and level-shifting
- IOFF supports partial-power-down, preventing back-powering when Vcc = 0
- Low static/dynamic power; suitable for portable/applications
- ESD protection (HBM) typical specs provided in datasheet
- Packaging: 8-pin, ABQ variant; Pb-free/RoHS-compliant
- Temperature range: standard automotive/industrial grades (-40°C to +125°C) depending on revision (confirm per datasheet)
Note: No internal pull-ups; the device is not a 3-state buffer.

Pin count: 14 pins (DIP-14/SOIC-14, depending on package).
Function: 74LVC07ABQ is an octal buffer/driver with open-drain outputs (eight non‑inverting buffer channels: A1–A8 to Y1–Y8). Outputs are open-drain and require pull-up resistors. Used for buffering/level‑shifting and bus interfacing.

- Manufacturer: Nexperia (Nexperia BV), a Dutch-based global semiconductor company.
- What kind of company: It designs and manufactures discrete semiconductors and logic/IC devices (originating from Philips Semiconductors).

74LVC07ABQ is a quad buffer with open-drain outputs (non-inverting) in the LVC family (Vcc 1.65–3.6 V). Typical application areas:
- Level shifting and buffering between voltage domains using external pull-ups to the desired high level.
- Open-drain bus interfaces and wired-AND/OR on shared lines (I2C-like or multi-device buses).
- Buffering to increase fan-out while isolating the driving source from capacitive loads.
- GPIO expansion for MCUs/FPGA across different voltages.
- Signal conditioning and isolation in mixed-signal designs; low-power digital buffering. Note: outputs do not source current; use pull-ups.

SOIC-14 (14-pin small-outline package; RoHS-compliant, ABQ suffix indicates the standard TI SOIC package).