Images à titre indicatif uniquement
2SA1162-Y
+Nomenclature50V 150MW 150MA PNP SOT-23
-
FabricantShenzhen Cisco micro Semiconductor Co., Ltd.
-
Pièce fabricant #2SA1162-Y
-
En stock25387
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| Part Status | Active |
| Transistor Type | PNP |
| Current - Collector (Ic) (Max) | 150 mA |
| Voltage - Collector Emitter Breakdown (Max) | 50 V |
| Vce Saturation (Max) @ Ib, Ic | 300mV @ 10mA, 100mA |
| Current - Collector Cutoff (Max) | 100nA (ICBO) |
| DC Current Gain (h FE) (Min) @ Ic, Vce | 120 @ 2mA, 6V |
| Power - Max | 150 mW |
| Frequency - Transition | 80MHz |
| Operating Temperature | 125°C (TJ) |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Supplier Device Package | SOT-23 |
| Packaging | Cut Tape (CT), Tape & Reel (TR) |
Présentation
Description
2SA1162-Y is a PNP silicon transistor in the 2SA family (Japanese naming; 2SC is the NPN complement). The “-Y” suffix is vendor-specific and may indicate a lead-free/ RoHS variant or a particular packaging code; it does not have a universal meaning across manufacturers.
Because the exact specs (Vceo, Ic, hFE, Pd, package) depend on the maker and lot, you must consult the manufacturer’s datasheet for 2SA1162-Y. If you only have the marking, check distributor catalogs or the supplier’s website to confirm the device’s electrical ratings and pinout. Common checks include:
- Maximum collector-emitter voltage (Vceo)
- Continuous collector current (Ic)
- Power dissipation (Pd)
- Current gain (hFE)
- Package type (e.g., TO-92, TO-220) and pin arrangement
If exact data isn’t available, you can look for a modern substitute with equivalent specs and pinout. Always verify from the actual datasheet before design use.
Because the exact specs (Vceo, Ic, hFE, Pd, package) depend on the maker and lot, you must consult the manufacturer’s datasheet for 2SA1162-Y. If you only have the marking, check distributor catalogs or the supplier’s website to confirm the device’s electrical ratings and pinout. Common checks include:
- Maximum collector-emitter voltage (Vceo)
- Continuous collector current (Ic)
- Power dissipation (Pd)
- Current gain (hFE)
- Package type (e.g., TO-92, TO-220) and pin arrangement
If exact data isn’t available, you can look for a modern substitute with equivalent specs and pinout. Always verify from the actual datasheet before design use.
Features
2SA1162-Y is a PNP silicon transistor (2SA family). Typical features (datasheet dependent):
- PNP, epitaxial-planar silicon transistor
- RoHS-compliant lead-free suffix “-Y”
- Vceo up to ~60 V
- Ic up to ~0.5 A
- High current gain (hFE commonly ~100–420)
- Low-noise suitable for audio/analog applications
- ft in the hundreds of MHz range (≈150–250 MHz)
- Power dissipation suitable for small-signal/driver use
- Package: standard through-hole TO-92 (check exact package variant by supplier)
Note: Exact ratings vary by manufacturer; always refer to the specific datasheet for the -Y part you’re sourcing.
- PNP, epitaxial-planar silicon transistor
- RoHS-compliant lead-free suffix “-Y”
- Vceo up to ~60 V
- Ic up to ~0.5 A
- High current gain (hFE commonly ~100–420)
- Low-noise suitable for audio/analog applications
- ft in the hundreds of MHz range (≈150–250 MHz)
- Power dissipation suitable for small-signal/driver use
- Package: standard through-hole TO-92 (check exact package variant by supplier)
Note: Exact ratings vary by manufacturer; always refer to the specific datasheet for the -Y part you’re sourcing.
Pinout
3 pins. Function: PNP bipolar transistor (2SA-series), used as a general-purpose amplifier/switch in electronic circuits.
Manufacturer
Manufacturer: Toshiba (Toshiba Electronics Devices & Storage Corporation).
What kind of company: A Japanese multinational electronics and semiconductor company that designs and manufactures a wide range of electronic components and devices.
What kind of company: A Japanese multinational electronics and semiconductor company that designs and manufactures a wide range of electronic components and devices.
Application
2SA1162-Y is a PNP transistor (2SA family). Common applications:
- Audio: preamp/driver stages and gain/VAS in small to medium power audio amplifiers
- General-purpose small-signal switching and level-shifting in analog circuits
- Regulator/pass element in DC power supplies (voltage regulation)
- Signal buffering in consumer electronics (and related automotive/industrial uses)
Note: suitable where a PNP small-signal transistor with moderate gain is required.
- Audio: preamp/driver stages and gain/VAS in small to medium power audio amplifiers
- General-purpose small-signal switching and level-shifting in analog circuits
- Regulator/pass element in DC power supplies (voltage regulation)
- Signal buffering in consumer electronics (and related automotive/industrial uses)
Note: suitable where a PNP small-signal transistor with moderate gain is required.
Package
TO-92 plastic package (three-lead, through-hole).
