Images à titre indicatif uniquement
24AA024T-I/MNY
+NomenclatureIC EEPROM 2KBIT I2C 400KHZ 8TDFN
-
FabricantTechnologie de micropuce
-
Pièce fabricant #24AA024T-I/MNY
-
Package WFDFN-8
-
En stock5759
365 Garantie qualité 24h/24
7*24 Garantie de service 24h/24
90-Garantie après-vente 24h/24
Garantie produit authentique
Spécifications
| Attribut | Valeur |
| Supplier | Microchip Technology |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| ProductStatus | Active |
| MemoryType | Non-Volatile |
| MemoryFormat | EEPROM |
| Technology | EEPROM |
| MemorySize | 2Kb (256 x 8) |
| MemoryInterface | I²C |
| ClockFrequency | 400 kHz |
| WriteCycleTime-WordPage | 5ms |
| AccessTime | 900 ns |
| Voltage-Supply | 1.7V ~ 5.5V |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 8-WFDFN Exposed Pad |
Présentation
Description
Key points:
- Size: 256 bytes of memory (nonvolatile).
- Interface: I2C (two-wire), standard up to 100 kHz and fast mode up to 400 kHz.
- Addressing: 3 hardware address pins (A0–A2) for up to 8 devices on one bus.
- Memory addressing: 8-bit address pointer (one byte address).
- Write: 8-byte page writes; write cycle typical ~5 ms.
- Power and temp: Vcc 1.7–5.5 V; Industrial temperature range (-40°C to +85°C) for the -I variant.
- Endurance/retention: ~1,000,000 write cycles; data retention on the order of decades.
- Packaging: 8-pin package; suffix -I indicates industrial temp; -MNY denotes lead-free/reel packaging code.
Typical uses: small config/calibration data, nonvolatile scratchpad, counters, and microcontroller storage.
Equivalent
Features
- I2C two‑wire interface; fast mode up to 400 kHz
- Memory density: 256 bytes (8-bit wide)
- 3 address pins (A0–A2) for multiple devices on the same bus
- WP pin for hardware write protection
- Page write capability (commonly 8-byte pages); write cycle ~5 ms
- Endurance: ~1,000,000 write cycles; Data retention > 200 years
- Operating voltage: typically 1.7–5.5 V
- Industrial temperature range: -40°C to +85°C (suffix I)
- 8‑pin package (MNY code: SOIC/PDIP variants)
Optional: designed for easy small-memory tasks requiring nonvolatile storage with simple I2C access. For exact voltage and package specifics, consult the datasheet.
Pinout
- Function: 2K-bit I2C serial EEPROM (256 × 8) providing non-volatile storage accessible via I2C two‑wire interface (supports page writes and random reads; device address bits allow multiple on the same bus).
Manufacturer
- What kind of company: A global semiconductor company that designs, manufactures, and sells integrated circuits and memory devices (e.g., EEPROM), as well as microcontrollers and analog/other ICs.
Application
- Non-volatile storage of device configuration, calibration data, and look-up tables
- Serial numbers/IDs, security keys, and PCB/module identification
- Small data logging and event counters
- Parameter storage for microcontrollers in automotive, industrial, medical, consumer electronics, and IoT
- Firmware/config data and handshake/boot parameters for embedded systems
In short: use wherever small, persistent memory for I2C-enabled devices is needed.