ADS1282IPWR vs ADS1208IPWRG4

Cette comparaison détaillée des composants ADS1282IPWR et ADS1208IPWRG4 vous offre un aperçu précieux de leurs spécifications et caractéristiques clés. Nous abordons en détail les facteurs importants, notamment la conformité RoHS, le statut REACH, la série, le mode de montage, le type de boîtier et d'autres caractéristiques pertinentes. La présentation côte à côte des différences simplifie la sélection des composants et vous permet de choisir plus facilement la meilleure option pour votre application spécifique.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS1282IPWR and ADS1208IPWRG4 are not drop-in replacements for one another. The ADS1282IPWR is a high-resolution 32-bit delta-sigma ADC with an integrated PGA and low-noise architecture intended for seismic and precision sensor acquisition, while the ADS1208IPWRG4 is a 16-bit second-order delta-sigma modulator with a digital filter interface intended for isolated current and voltage sensing. Their resolution, output interface, supply architecture, and package pinouts differ fundamentally, so a direct board-level substitution is not feasible without redesign.

Different resolution Different output interface Different supply architecture Different package pinout

Parts at a glance

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1282IPWR ADS1208IPWRG4 Why it matters
Resolution (bits) 31 16 Resolution determines the smallest signal change the ADC can distinguish; a 31-bit delta-sigma converter offers far finer measurement precision than a 16-bit device.
Architecture Delta-Sigma (2nd order) Delta-Sigma (2nd order) Both use delta-sigma modulation, but the ADS1282 is a high-resolution seismic-grade converter while the ADS1208 is a lower-resolution isolated modulator, so they are not functionally interchangeable.
Input Type Differential Differential Differential inputs reject common-mode noise; both share this, but the ADS1282 supports a wider analog input range suited to direct sensor connection.
Data Interface SPI (serial) Serial (modulator bitstream) The ADS1282 outputs digitized SPI data, whereas the ADS1208 outputs a raw 1-bit modulator stream requiring external digital filtering, changing system architecture.
Supply Voltage (analog) 5 V (analog), 3.3 V (digital) 5 V Supply requirements affect board-level power design; the ADS1282 uses separate analog and digital rails while the ADS1208 runs from a single 5 V supply.
Package TSSOP-28 TSSOP-16 Different pin counts and footprints mean the two parts are not drop-in compatible on the same PCB layout.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Both cover the industrial temperature range, so environmental tolerance is comparable for industrial applications.
Typical Application Seismic and energy exploration, high-resolution sensor measurement Motor control, current sensing, isolated signal conditioning Target applications differ significantly; the ADS1282 targets precision measurement while the ADS1208 targets isolated motor/current sensing, limiting substitutability.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1282IPWR ADS1208IPWRG4
Supplier - Texas Instruments
Part Status Active Obsolete
Type - Modulator
Number of Channels - 1
Resolution(Bits) - 16 b
Sampling Rate(Per Second) 4k 40k
Data Interface SPI Serial
Voltage Supply Source - Analog and Digital
Voltage - Supply - 2.7V ~ 5.5V, 4.5V ~ 5.5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type - Surface Mount
Number of Bits 31 -
Number of Inputs 1 -
Input Type Differential -
Configuration ADC -
Number of A/D Converters 1 -
Architecture Sigma-Delta -
Reference Type External -
Voltage - Supply, Analog 5V -
Voltage - Supply, Digital 1.65V ~ 3.6V -
Features PGA -

Frequently asked questions

What are the primary functional differences between the ADS1282IPWR and ADS1208IPWRG4?

The ADS1282IPWR is a high-resolution, 32-bit delta-sigma analog-to-digital converter (ADC) designed for seismic and energy exploration applications, featuring a programmable gain amplifier (PGA) and multiple filter options. The ADS1208IPWRG4 is a 16-bit, second-order delta-sigma modulator with an integrated current-shunt interface, intended for isolated current sensing and industrial motor control. They differ fundamentally in resolution, architecture, and target application.

Are the ADS1282IPWR and ADS1208IPWRG4 pin-compatible or package-compatible?

No. The ADS1282IPWR is supplied in a TSSOP-28 package, while the ADS1208IPWRG4 is supplied in a TSSOP-16 package. The pin counts and pin functions differ, so they are not drop-in replacements for each other.

What are the respective resolution and data-rate characteristics of these two devices?

The ADS1282IPWR provides 32-bit resolution with programmable data rates up to 4 kSPS in its standard operating modes. The ADS1208IPWRG4 is a 16-bit modulator with a typical output data rate of 10 MHz clock-derived bitstream, requiring external digital filtering to produce a 16-bit result. The two devices are not interchangeable in resolution or output format.

Do both devices include an integrated programmable gain amplifier (PGA)?

No. The ADS1282IPWR includes an integrated low-noise PGA with selectable gains of 1, 2, 4, 8, 16, 32, and 64. The ADS1208IPWRG4 does not include a PGA; it provides a modulator output that is typically processed by an external digital filter and, in current-sensing applications, an external shunt resistor.

What are the typical target applications for each device?

The ADS1282IPWR is intended for high-resolution seismic data acquisition, energy exploration, and precision industrial measurement. The ADS1208IPWRG4 is intended for isolated current sensing, motor control, and industrial inverter applications where a 16-bit modulator output is processed by an external controller or digital filter.

Can the ADS1208IPWRG4 be used as a direct substitute for the ADS1282IPWR in an existing design?

No. The devices differ in resolution (16-bit vs. 32-bit), package (TSSOP-16 vs. TSSOP-28), integrated PGA availability, output format, and target application. A direct substitution is not supported; any replacement would require a complete redesign of the signal chain, PCB layout, and digital filtering.

What supply-voltage and interface considerations distinguish these two parts?

The ADS1282IPWR operates from a 5 V analog supply with a separate digital supply and provides a serial peripheral interface (SPI) for configuration and data readout. The ADS1208IPWRG4 operates from a 5 V supply and outputs a single-bit modulator data stream that must be filtered externally. Designers must verify supply sequencing, reference requirements, and digital interface timing against the respective manufacturer datasheets before use.