ADS1274IPAPT
Texas Instruments
- Lifecycle
- Active
- Stock
- 4734 PCS
- Package
- HTQFP-64
- Series
- Acquisition de données - Convertisseur analogique - numérique (ADC)
Cette comparaison détaillée des composants ADS1274IPAPT et ADS1278IPAPR vous offre un aperçu précieux de leurs spécifications et caractéristiques clés. Nous abordons en détail les facteurs importants, notamment la conformité RoHS, le statut REACH, la série, le mode de montage, le type de boîtier et d'autres caractéristiques pertinentes. La présentation côte à côte des différences simplifie la sélection des composants et vous permet de choisir plus facilement la meilleure option pour votre application spécifique.
Replacement verdict
The ADS1278IPAPR and ADS1274IPAPT are functionally compatible candidates for replacement, sharing the same TQFP-64 package, 24-bit delta-sigma architecture, and wide supply range. The primary distinction is channel count, with the ADS1278 offering eight channels versus four on the ADS1274, so system channel requirements must be validated before substitution.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1278IPAPR | ADS1274IPAPT | Why it matters |
|---|---|---|---|
| Number of input channels | 8 | 4 | Determines how many independent analog signals can be sampled simultaneously; a direct functional difference for multi-channel acquisition systems. |
| Resolution | 24 bits | 24 bits | Sets the dynamic range and precision of the conversion; identical resolution means comparable measurement fidelity. |
| Max sample rate (per channel) | 144 kSPS | 144 kSPS | Defines the maximum signal bandwidth that can be captured; matching rates support equivalent high-speed acquisition. |
| Architecture | Delta-sigma | Delta-sigma | The converter topology affects noise shaping, filtering needs, and suitability for precision low-frequency measurements. |
| Supply voltage (analog) | 5 V | 5 V | Must match the system power rail; identical analog supply simplifies board-level substitution. |
| Digital supply voltage | 1.8 V to 3.3 V | 1.8 V to 3.3 V | Determines logic-level compatibility with the host controller or FPGA interface. |
| Interface type | SPI / serial (frame-sync) | SPI / serial (frame-sync) | Defines how data is read out; matching interfaces allow reuse of the same digital host design. |
| Package | 64-pin HTQFP (PowerPAD) | 64-pin HTQFP (PowerPAD) | Footprint and thermal characteristics must match for a drop-in board replacement; package differences affect layout and assembly. |
| Operating temperature range | -40 °C to +125 °C | -40 °C to +125 °C | Confirms suitability for industrial and harsh-environment applications; matching ranges support equivalent reliability. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1274IPAPT | ADS1278IPAPR |
|---|---|---|
| Part Status | Active | Active |
| Number of Bits | 24 | 24 |
| Sampling Rate(Per Second) | 144k | 144k |
| Number of Inputs | 4 | 8 |
| Input Type | Differential | Differential |
| Data Interface | SPI | SPI |
| Configuration | ADC | ADC |
| Number of A/D Converters | 4 | 1 |
| Architecture | Sigma-Delta | Sigma-Delta |
| Reference Type | External | External |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 1.65V ~ 1.95V | 1.65V ~ 1.95V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 105°C |
The ADS1278IPAPR is an octal (8-channel) 24-bit simultaneous-sampling delta-sigma ADC, while the ADS1274IPAPT is a quad (4-channel) version of the same family. Both share the same 64-pin HTQFP (PAP) package, 24-bit resolution, and selectable data rates up to 144 kSPS in High-Speed mode, but the ADS1278 provides eight differential input channels versus four on the ADS1274.
Both devices are offered in the same 64-pin HTQFP (PAP) package, but they are not functionally drop-in replacements because the ADS1278 uses the additional pins for channels 5 through 8, whereas the ADS1274 does not provide those channels. Pin functions must be verified against the respective datasheets before any layout reuse.
Both the ADS1278 and ADS1274 support selectable data rates up to 144 kSPS in High-Speed mode, 52 kSPS in High-Resolution mode, 52 kSPS in Low-Power mode, and 10.5 kSPS in Low-Speed mode, per the Texas Instruments datasheet.
Both are 24-bit delta-sigma (ΔΣ) analog-to-digital converters with simultaneous sampling of all channels, designed for multi-channel precision measurement applications such as industrial instrumentation and vibration analysis.
The ADS1274 (4-channel) consumes less total power than the ADS1278 (8-channel) because it contains fewer converter channels. Per-channel power in each operating mode is comparable across the family; refer to the TI datasheet for exact per-mode supply current specifications.
Both devices provide a flexible serial interface supporting SPI-compatible, Frame-Sync, and Modulator modes, allowing daisy-chaining of multiple devices and direct connection to DSPs and FPGAs.
The "IPAP" portion indicates the industrial temperature range (-40°C to +85°C) 64-pin HTQFP package. The trailing "R" denotes tape-and-reel packaging for the ADS1278IPAPR, while the trailing "T" denotes tube (rail) packaging for the ADS1274IPAPT.
Only if the design requires no more than four simultaneous channels. The ADS1274 provides four channels versus eight on the ADS1278, so substituting it reduces channel count and requires validation of the channel mapping, firmware, and PCB layout against the target design.