ADS1282HIPWR vs ADS1219IPWR

Cette comparaison détaillée des composants ADS1282HIPWR et ADS1219IPWR vous offre un aperçu précieux de leurs spécifications et caractéristiques clés. Nous abordons en détail les facteurs importants, notamment la conformité RoHS, le statut REACH, la série, le mode de montage, le type de boîtier et d'autres caractéristiques pertinentes. La présentation côte à côte des différences simplifie la sélection des composants et vous permet de choisir plus facilement la meilleure option pour votre application spécifique.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS1219IPWR and ADS1282HIPWR are not drop-in replacements for one another. The ADS1219IPWR is a 24-bit, 4-channel delta-sigma ADC with an I2C interface in a TSSOP-16 package, while the ADS1282HIPWR is a 31-bit, 2-channel delta-sigma ADC with an SPI interface in a TSSOP-28 package. Their differing resolution, channel count, digital interface, package footprint, and target application domains make direct substitution impractical without a full system redesign.

Different resolution Different channel count Different digital interface Different package footprint

Parts at a glance

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1219IPWR ADS1282HIPWR Why it matters
Resolution (bits) 24 31 Higher resolution enables finer measurement of small signal changes, which is critical for precision seismic and high-dynamic-range applications.
Number of input channels 4 (differential/single-ended) 2 (differential) Channel count determines how many independent signals can be digitized without external multiplexing, affecting system architecture and board space.
Maximum sample rate 1 kSPS 4 kSPS Sample rate sets the bandwidth of signals that can be captured; higher rates support faster-changing inputs and wider signal bandwidth.
Interface type I2C SPI The digital interface must match the host microcontroller or FPGA, so a different bus can require hardware and firmware redesign.
Supply voltage (analog) 2.7 V to 5.5 V 5 V (analog, ±2.5 V bipolar) Supply requirements affect power design and compatibility with existing rails; a different analog supply may need additional regulation.
PGA / gain stage Integrated PGA (gain 1 to 128) Integrated PGA (gain 1 to 64) On-chip gain allows direct connection of low-level sensors; differing gain ranges change the smallest detectable input signal.
Package TSSOP-16 TSSOP-28 Package footprint and pin count must match the PCB layout; a different package requires a board redesign and cannot be drop-in substituted.
Operating temperature range -40 °C to +125 °C -40 °C to +85 °C The temperature range determines suitability for harsh or industrial environments; a narrower range may limit use in high-temperature applications.
Typical application focus General-purpose precision sensing, portable instrumentation Seismic and energy exploration, high-resolution data acquisition Application focus indicates the intended noise, linearity, and bandwidth trade-offs, helping judge functional substitutability in a given design.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1282HIPWR ADS1219IPWR
Part Status Active Active
Number of Bits 31 24
Sampling Rate (Per Second) 4k -
Number of Inputs 2 4
Input Type Differential Differential, Single Ended
Data Interface SPI I²C
Configuration ADC MUX-ADC
Number of A / D Converters 1 -
Architecture Sigma-Delta Sigma-Delta
Reference Type External External, Internal
Voltage - Supply, Analog 5V 2.3V ~ 5.5V
Voltage - Supply, Digital 1.65V ~ 3.6V 2.3V ~ 5.5V
Features PGA PGA
Operating Temperature -40°C ~ 85°C -40°C ~ 125°C
Mounting Type Surface Mount -
Base Product Number ADS1282 -
Sampling Rate(Per Second) - 1k
Ratio - S / H: ADC - 0:1
Number of A/D Converters - 1

Frequently asked questions

What are the primary differences between the ADS1219IPWR and ADS1282HIPWR?

The ADS1219IPWR is a 24-bit, 4-channel, delta-sigma ADC with an I2C interface, operating from a single 2.7 V to 5.5 V supply and housed in a TSSOP-16 package. The ADS1282HIPWR is a 31-bit, 2-channel, delta-sigma ADC with an SPI interface, designed for high-resolution seismic and energy exploration applications, operating from a 5 V analog supply and housed in a TSSOP-28 package. They differ in resolution, channel count, interface, supply requirements, and package footprint.

Can the ADS1219IPWR be used as a drop-in replacement for the ADS1282HIPWR?

No. The two devices have different pin counts (16 vs 28), different package sizes (TSSOP-16 vs TSSOP-28), different serial interfaces (I2C vs SPI), and different supply voltage requirements. A direct drop-in replacement is not possible without PCB redesign and firmware changes.

What are the resolution and data rate specifications of each device?

The ADS1219IPWR provides 24-bit resolution with programmable data rates from 20 SPS to 1 kSPS. The ADS1282HIPWR provides 31-bit resolution with data rates from 250 SPS to 4 kSPS. The ADS1282HIPWR targets higher-resolution, higher-speed precision applications, while the ADS1219IPWR targets lower-speed, multi-channel general-purpose sensing.

How do the input channel configurations compare?

The ADS1219IPWR offers 4 single-ended or 2 differential input channels with a programmable gain amplifier. The ADS1282HIPWR offers 2 differential input channels with a low-noise PGA. The ADS1219IPWR suits multi-channel sensor monitoring, while the ADS1282HIPWR suits dual-channel high-resolution seismic or vibration measurement.

What communication interfaces do these ADCs use?

The ADS1219IPWR uses an I2C interface supporting standard, fast, and fast-plus modes. The ADS1282HIPWR uses an SPI-compatible serial interface. System designers must ensure the host microcontroller supports the corresponding interface before selecting either device.

What are the supply voltage requirements for each part?

The ADS1219IPWR operates from a single analog and digital supply in the range of 2.7 V to 5.5 V. The ADS1282HIPWR requires a 5 V analog supply (AVDD) and a separate digital supply (DVDD) in the range of 1.8 V to 3.3 V. Power supply design must account for these differences.

Which device is better suited for seismic or high-resolution vibration measurement?

The ADS1282HIPWR is specifically designed for seismic and energy exploration applications, offering 31-bit resolution, low noise, and data rates up to 4 kSPS. The ADS1219IPWR, with 24-bit resolution and lower data rates, is better suited for general-purpose multi-channel industrial sensing rather than high-resolution seismic acquisition.

Do both devices support the same operating temperature range?

Both the ADS1219IPWR and ADS1282HIPWR are specified for the industrial temperature range of -40°C to +125°C, as documented in their respective manufacturer datasheets. This allows both parts to be used in similar industrial environments, though other electrical and package differences remain.