ADM3050EBRWZ
Analog Equipment GmbH.
- Lifecycle
- Active
- Stock
- 5661 PCS
- Package
- SOIC-16
- Series
- Interfaces - pilotes, récepteurs, émetteurs - récepteurs
Cette comparaison détaillée des composants ADM3050EBRWZ et ADM3071EYRZ vous offre un aperçu précieux de leurs spécifications et caractéristiques clés. Nous abordons en détail les facteurs importants, notamment la conformité RoHS, le statut REACH, la série, le mode de montage, le type de boîtier et d'autres caractéristiques pertinentes. La présentation côte à côte des différences simplifie la sélection des composants et vous permet de choisir plus facilement la meilleure option pour votre application spécifique.
Replacement verdict
The ADM3050EBRWZ and ADM3071EYRZ are not functionally interchangeable. The ADM3050EBRWZ is an isolated CAN transceiver, while the ADM3071EYRZ is a non-isolated RS-485/RS-422 transceiver; they differ in bus protocol, isolation, and duplex configuration, so substituting one for the other is not feasible without a full interface redesign.
Analog Equipment GmbH.
Analog Equipment GmbH.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADM3050EBRWZ | ADM3071EYRZ | Why it matters |
|---|---|---|---|
| Function / Protocol | Isolated CAN transceiver (CAN FD capable) | Isolated RS-485/RS-422 transceiver | These devices serve different bus protocols (CAN vs RS-485), so they are not functionally interchangeable in a given network. |
| Data Rate | Up to 12 Mbps (CAN FD) | Up to 250 kbps (slew-rate limited) | Maximum data rate determines whether the part meets the bandwidth requirements of the bus. |
| Isolation Voltage | 5 kV rms (galvanic isolation) | 2.5 kV rms (galvanic isolation) | Higher isolation voltage provides greater safety margin and robustness in harsh or high-voltage environments. |
| Supply Voltage | 5 V (single supply) | 5 V (single supply) | Supply voltage must match the system rail; both operate from 5 V, easing power design. |
| Duplex / Channel Type | Half-duplex CAN (differential bus) | Full-duplex RS-485/RS-422 | Duplex configuration affects wiring topology and whether simultaneous transmit/receive is supported. |
| Package | 16-lead SOIC (wide body) | 16-lead SOIC (wide body) | Package footprint must match the PCB layout for a drop-in replacement. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +85 °C | Wider temperature range supports use in industrial and automotive environments. |
| Number of Transceivers | 1 (single CAN channel) | 1 (single RS-485 channel) | Channel count determines how many independent bus lines the device can drive. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADM3050EBRWZ | ADM3071EYRZ |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Type | Transceiver, Isolated | Transceiver |
| Protocol | CAN | RS422, RS485 |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Duplex | - | Full |
| Receiver Hysteresis | - | 100 mV |
| Data Rate | 12Mbps | 250kbps |
| Voltage - Supply | 0.5V ~ 6V | 3V ~ 3.6V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
| Series | iCoupler® | - |
The ADM3050EBRWZ is a galvanically isolated CAN transceiver compliant with ISO 11898-2, supporting data rates up to 12 Mbps and featuring 5 kV rms isolation. The ADM3071EYRZ is a non-isolated, full-duplex RS-485/RS-422 transceiver rated for data rates up to 250 kbps. They serve different bus protocols and isolation requirements.
No. The ADM3050EBRWZ is supplied in a 16-lead SOIC_W package, while the ADM3071EYRZ is supplied in an 8-lead SOIC_N package. Pin counts, pin functions, and package dimensions differ, so they are not drop-in replacements.
Only the ADM3050EBRWZ provides galvanic isolation, rated at 5 kV rms per UL 1577 and CSA. The ADM3071EYRZ is a non-isolated RS-485/RS-422 transceiver and does not include an isolation barrier.
The ADM3050EBRWZ operates from a single 5 V supply on VCC1 and VCC2 (both 4.5 V to 5.5 V). The ADM3071EYRZ operates from a single 3.3 V supply (3.0 V to 3.6 V). Supply rails are not interchangeable between the two parts.
The ADM3050EBRWZ supports CAN data rates up to 12 Mbps. The ADM3071EYRZ supports RS-485/RS-422 data rates up to 250 kbps. The ADM3050EBRWZ is therefore suited to high-speed CAN networks, while the ADM3071EYRZ targets lower-speed RS-485 links.
No. The ADM3071EYRZ is an RS-485/RS-422 transceiver and does not implement CAN differential signaling or ISO 11898-2 compliance. It also lacks isolation. Substitution would require a CAN transceiver with matching isolation and protocol characteristics.
Both the ADM3050EBRWZ and the ADM3071EYRZ are specified for the industrial temperature range of −40 °C to +85 °C, per their respective manufacturer datasheets.
The ADM3071EYRZ is a full-duplex RS-485/RS-422 transceiver. The ADM3050EBRWZ is a CAN transceiver, which uses a single differential pair for bidirectional communication and is not classified as full-duplex in the RS-485 sense.