ADM1485JRZ
Analog Equipment GmbH.
- Lifecycle
- Active
- Stock
- 5495 PCS
- Package
- SOIC-8
- Series
- Interfaces - pilotes, récepteurs, émetteurs - récepteurs
Cette comparaison détaillée des composants ADM1485JRZ et ADM1486AR vous offre un aperçu précieux de leurs spécifications et caractéristiques clés. Nous abordons en détail les facteurs importants, notamment la conformité RoHS, le statut REACH, la série, le mode de montage, le type de boîtier et d'autres caractéristiques pertinentes. La présentation côte à côte des différences simplifie la sélection des composants et vous permet de choisir plus facilement la meilleure option pour votre application spécifique.
Replacement verdict
The ADM1486AR can serve as a functional replacement candidate for the ADM1485JRZ in many RS-485 applications, as both are 5 V low-power transceivers in 8-pin SOIC packages with comparable data rates and supply requirements. However, the ADM1486AR offers a reduced slew rate for lower EMI, which may affect maximum cable length and termination tolerance, so the system designer should validate timing margins and bus loading before committing to the substitution.
Analog Equipment GmbH.
Analog Equipment GmbH.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADM1485JRZ | ADM1486AR | Why it matters |
|---|---|---|---|
| Data Rate | 30 Mbps | 30 Mbps | Maximum signaling rate; both support the same 30 Mbps, so speed is not a differentiator for substitution. |
| Duplex Mode | Half-duplex | Full-duplex | Half-duplex shares one pair for transmit/receive, while full-duplex uses separate pairs; this fundamentally changes bus wiring and cannot be substituted without redesign. |
| Number of Drivers/Receivers | 1 driver / 1 receiver | 1 driver / 1 receiver | Transceiver channel count; identical here, so both provide a single bidirectional channel per package. |
| Supply Voltage | 5 V | 5 V | Operating supply rail; both are 5 V devices, so power supply compatibility is maintained. |
| Package / Mounting | 8-SOIC (surface mount) | 8-SOIC (surface mount) | Footprint and assembly compatibility; identical SOIC-8 packages allow drop-in PCB placement. |
| Operating Temperature Range | 0°C to +70°C | -40°C to +85°C | Ambient temperature range; the wider industrial range of the ADM1486AR matters for harsh environments where the commercial-grade ADM1485JRZ may not be rated. |
| Fail-Safe Receiver | Yes (open-circuit fail-safe) | Yes (open-circuit fail-safe) | Ensures a defined logic output when the bus is idle or open; both provide this, aiding reliable bus behavior. |
| ESD Protection (Bus Pins) | ±15 kV (HBM) | ±15 kV (HBM) | Robustness against electrostatic discharge on the bus; identical ratings mean equivalent field reliability. |
| Driver Output / Receiver Input Compliance | RS-485 / RS-422 compliant | RS-485 / RS-422 compliant | Standards compliance ensures interoperability on multipoint buses; both meet the same RS-485/RS-422 specifications. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADM1485JRZ | ADM1486AR |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Type | Transceiver | Transceiver |
| Protocol | RS422, RS485 | RS422, RS485 |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Duplex | Half | Half |
| Receiver Hysteresis | 70 mV | 70 mV |
| Data Rate | 30Mbps | 30Mbps |
| Voltage - Supply | 4.75V ~ 5.25V | 4.75V ~ 5.25V |
| Operating Temperature | 0°C ~ 70°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
The ADM1485JRZ is a 5 V, low-power, half-duplex RS-485/RS-422 transceiver specified for data rates up to 30 Mbps, supplied in an 8-lead SOIC package. The ADM1486AR is a 5 V, half-duplex RS-485/RS-422 transceiver specified for data rates up to 2.5 Mbps, supplied in an 8-lead SOIC package. The principal differences are the maximum data rate and the corresponding slew-rate-limited driver of the ADM1486AR, which reduces EMI and improves signal integrity on long cables.
Yes. Both devices are offered in the standard 8-lead SOIC (R-8) package with the same pinout: RO, /RE, DE, DI, GND, A, B, and VCC. This allows the ADM1486AR to be used in place of the ADM1485JRZ on an existing PCB layout, provided the lower 2.5 Mbps data rate is acceptable for the application.
They are functionally similar half-duplex RS-485 transceivers and share the same package and pinout, but they are not identical. The ADM1485JRZ supports up to 30 Mbps, while the ADM1486AR is limited to 2.5 Mbps due to its slew-rate-limited driver. Substitution is acceptable only if the system data rate does not exceed 2.5 Mbps and the reduced driver slew rate is compatible with the bus topology and termination.
The ADM1485JRZ is specified for data rates up to 30 Mbps. The ADM1486AR is specified for data rates up to 2.5 Mbps. The lower rate of the ADM1486AR results from its slew-rate-limited output, which is intended to reduce electromagnetic interference and reflections on long transmission lines.
Yes. Both the ADM1485JRZ and the ADM1486AR are specified for operation from a single 5 V ±5% supply (4.75 V to 5.25 V). Both are low-power CMOS devices suitable for 5 V RS-485/RS-422 bus systems.
The ADM1485JRZ uses a high-speed driver capable of supporting 30 Mbps, which implies a fast output slew rate. The ADM1486AR employs a slew-rate-limited driver that restricts the output transition rate, limiting the device to 2.5 Mbps while reducing EMI and cable reflections. The exact slew-rate values should be taken from the respective manufacturer datasheets.
Yes. Both the ADM1485JRZ and the ADM1486AR are half-duplex RS-485/RS-422 transceivers with a single differential pair (A and B) and driver-enable (/RE, DE) control pins, making them suitable for two-wire, half-duplex bus configurations.
For long-cable networks where EMI and reflections are a concern and the data rate is 2.5 Mbps or lower, the ADM1486AR is generally preferred because its slew-rate-limited driver reduces high-frequency emissions and improves signal integrity. For applications requiring data rates above 2.5 Mbps up to 30 Mbps, the ADM1485JRZ is the appropriate choice, provided the bus is designed to handle the faster edge rates.