AD5254BRUZ100 vs AD5254BRU50

Cette comparaison détaillée des composants AD5254BRUZ100 et AD5254BRU50 vous offre un aperçu précieux de leurs spécifications et caractéristiques clés. Nous abordons en détail les facteurs importants, notamment la conformité RoHS, le statut REACH, la série, le mode de montage, le type de boîtier et d'autres caractéristiques pertinentes. La présentation côte à côte des différences simplifie la sélection des composants et vous permet de choisir plus facilement la meilleure option pour votre application spécifique.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD5254BRUZ100 and AD5254BRU50 are functionally compatible digital potentiometers from the same AD5254 family, sharing identical architecture, interface, channel count, and package type. The primary distinction is end-to-end resistance, which affects the rheostat mode current handling and voltage divider loading characteristics. Designers must verify that the 50 kΩ variant meets the specific resistance requirements of their application before substituting.

End-to-End Resistance Not compatible
Package Type High match
Channel Count High match
Interface Type High match

Parts at a glance

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD5254BRUZ100 AD5254BRU50 Why it matters
End-to-End Resistance 100 kΩ 50 kΩ Determines the nominal resistance range of the digital potentiometer, directly affecting the current and voltage levels in the application circuit.
Number of Positions 256 256 Defines the resolution or number of wiper tap settings available for adjustment.
Number of Channels 4 4 Indicates how many independent potentiometer channels are integrated in a single package.
Interface Type I²C I²C Specifies the digital communication protocol used to control the device, affecting host controller compatibility.
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V Defines the operating voltage window required for proper device function and logic level compatibility.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Specifies the ambient temperature range over which the device is guaranteed to operate within specifications.
Package / Case 14-TSSOP 14-TSSOP Determines the physical footprint and mounting compatibility on the PCB.
Nonvolatile Memory Yes (EEPROM) Yes (EEPROM) Indicates whether the wiper setting is retained after power loss, which is critical for applications requiring preset restoration.
Wiper Resistance Typical 100 Ω Typical 100 Ω Represents the parasitic resistance of the wiper switch, affecting accuracy and signal integrity in the signal path.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD5254BRUZ100 AD5254BRU50
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Obsolete
Taper Linear Linear
Configuration Potentiometer Potentiometer
Number of Circuits 4 4
Number of Taps 256 256
Resistance(Ohms) 100k 50k
Interface I²C I²C
Memory Type Non-Volatile Non-Volatile
Voltage - Supply 2.7V ~ 5.5V, ±2.25V ~ 2.75V 2.7V ~ 5.5V, ±2.25V ~ 2.75V
Features Selectable Address Selectable Address
Tolerance ±20% ±20%
Temperature Coefficient(Typ) 650ppm/°C 650ppm/°C
Mounting Type Surface Mount Surface Mount
Operating Temperature -40°C ~ 105°C -40°C ~ 105°C

Frequently asked questions

What is the main difference between the AD5254BRUZ100 and the AD5254BRU50?

The primary difference is the end-to-end resistance value of the digital potentiometer. The AD5254BRUZ100 has a nominal resistance of 100 kΩ, while the AD5254BRU50 has a nominal resistance of 50 kΩ. Both are quad-channel, 256-position, I2C-compatible digital potentiometers from Analog Devices in a 20-lead TSSOP package.

Are the AD5254BRUZ100 and AD5254BRU50 pin-compatible?

Yes. Both devices are offered in the same 20-lead TSSOP (RU-20) package and share the same pinout. The only difference is the internal resistor array value, so they are pin-to-pin compatible in designs where the resistance value can be adjusted.

Can the AD5254BRUZ100 and AD5254BRU50 be used interchangeably in an existing design?

Not without validation. Although they are pin-compatible, the 2:1 resistance difference affects divider ratios, current through the potentiometer, power dissipation, and the resulting output voltage or gain in the target circuit. The designer must verify that the new resistance value meets the circuit requirements before substitution.

Do both parts have the same number of positions and interface?

Yes. Both the AD5254BRUZ100 and AD5254BRU50 are 256-position (8-bit) quad-channel digital potentiometers with an I2C-compatible serial interface. They also include nonvolatile EEPROM memory for storing wiper settings, and both operate from a single 2.7 V to 5.5 V supply or dual ±2.5 V supplies.

How does the resistance value affect power dissipation in these devices?

For a given voltage across the potentiometer terminals, the 50 kΩ version (AD5254BRU50) will dissipate approximately twice the power of the 100 kΩ version (AD5254BRUZ100), since power is inversely proportional to resistance (P = V²/R). The designer must ensure the power rating of the selected device and package is not exceeded.

Are the AD5254BRUZ100 and AD5254BRU50 available in the same temperature range?

Yes. Both devices are specified for the industrial temperature range of −40°C to +85°C, consistent with the Analog Devices AD5254 datasheet for the RU-20 package options.

Which part should be selected for a circuit requiring lower current through the potentiometer?

The AD5254BRUZ100 (100 kΩ) should be selected when lower current through the potentiometer is desired, because for the same applied voltage the current is inversely proportional to resistance. The AD5254BRU50 (50 kΩ) will draw approximately twice the current of the 100 kΩ version under identical voltage conditions.